Search Results

1 - 12 of 41 Products for 'Dc User Manual' Page 1 of 4 |
Related Categories: Thomas Merk | Bret Dimarco | Ols | Frit Welding | Infinera

Dc User Manual

an rep 2018 workfile 02

an rep 2018 workfile 02

…materials processing segment with a very broad product portfolio. Laser
sources include the Diamond series mid-power CO and CO2
lasers; the DC series of high power CO2
lasers; Highlight FL high power fiber lasers; the DF series of high power diode laser systems; the
Diamond…

PWS Mini Table Workstation

PWS Mini Table Workstation

…Y axes 15 mm
* Travel distance Z axis 75 mm
* Processing head on manual feed axis, 25 mm
* Manual slide axis (+/-90°) for fiber optic processing head
* Rotary axis with pneumatic clamping device (optional)
* Each axis with DC Servo drive and encoder, resolution X and Y-axis 0.0127 mm
* (0.0005”),…

FieldMate

FieldMate

…below to download a complete drawing package for these products. FieldMate (1098297) Datasheet FieldMate Related Materials White Papers FieldMate User Manual Call +1 800 527 3786 | Outside the U.S. +1 408 764 4983 Coherent has locations across the globe that are available to provide support for any…

Materials Processing & Industrial Applications

Materials Processing & Industrial Applications

…over the bolting process because it offers higher strength and reliability of the repair. Unfortunately, the manual process involved in grinding is not repeatable and it requires high user skills. By using the ExciStar at 248 nm or a frequency tripled DPSS laser emitting 355 nm like the AVIA, it is…

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual
A - 2
Persistent
Parameters
Refer to "Persistent Parameters" (p. 4-28).
Front Panel Power switch
USB high-speed port (mini-B connector)
Trigger output (SMB connector)
Analog output (SMB connector)
RS-232 port (DB-9F connector)…

FieldMaxII-TO User Manual

FieldMaxII-TO User Manual

…USB 1.1
Digital Tuning Needle
100 mS (tau)
20 Hz (update rate)
Power Requirements
AC operation: 90-to-260 VAC, 50/60 Hz
DC power input: 12 VDC, 1.25A, center-positive
Battery operation: rechargeable battery pack
(standard) or six optional 1.5V AA alkaline

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual

…USB 1.1
Digital Tuning Needle
100 mS (tau)
20 Hz (update rate)
Power Requirements
AC operation: 90-to-260 VAC, 50/60 Hz
DC power input: 12 VDC, 1.25A, center-positive
Battery operation: rechargeable battery pack
(standard) or six optional 1.5V AA alkaline

FieldMaxII-P User Manual

FieldMaxII-P User Manual

…USB 1.1
Digital Tuning Needle
100 mS (tau)
20 Hz (update rate)
Power Requirements
AC operation: 90-to-260 VAC, 50/60 Hz
DC power input: 12 VDC, 1.25A, center-positive
Battery operation: rechargeable battery pack
(standard) or six optional 1.5V AA alkaline

Coherent Magnum II Laser Operator's Manual

Coherent Magnum II Laser Operator's Manual

User Interface
2 - 3
Control Panel Both Magnum II options have the same control panel (refer to
Figure 2-2, below). It is located at the back panel of the Magnum II
standard option and the back panel of the laser driver unit of the
separate driver option.
DC Power…

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

…safety glasses.
Electrical Safety The Astrella uses AC and DC voltages in the laser head and
controller. All units are designed to be operated with protective
covers in place. Certain procedures in this manual require removal
of the protective covers. These procedures shall…

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

…safety glasses protect the user from eye damage by
blocking light at the laser wavelengths. However, this also
prevents the operator from seeing the beam. Use extreme
caution even while wearing safety glasses.
Electrical Safety The Astrella uses AC and DC voltages in the laser…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…The + 48 VDC cable from the DC power supply is to be connected
to the + 48 VDC marked connector on the rear panel. This is a
special filtered connector that passes DC current but blocks RF
emission. As illustrated in Figure 3-17, it is important that the user
make this connection…