Search Results

Refine

Result Type

1 - 7 of 7 Products for 'Dcps System' Page 1 of 1 |
  • 1

Dcps System

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

…4-6
Extended I/O
DB-25 connector (female).
Contains shutter interface signals and status, interlocks, low
speed faults, and system warning.
Table 4-7 on page 4-20
and
Table 4-8 on page 4-21
Interface Embedded
Control
RJ-45 LAN connector
Remote…

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB


DCPS Accessory Kit, 3
meters
Liquid-cooling
System/Chiller
1 Provides temperature regulated liquid coolant to laser system No
Coolant kit 1
Coolant kit contains particle filter, fittings and coolant hose
required to provide coolant to the laser system from the…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…install the laser
system:
· Scissors or a package cutting knife
· Forklift or pallet jack to lift 77 kg (170 lbs.) - the weight of a
fully loaded shipping crate
· A hoist capable of lifting at least 45 kg (100 lbs.) - the weight
of the laser system
· A cart capable…

00 E-250 Pre.book

00 E-250 Pre.book

…install the laser
system:
· Scissors or a package cutting knife
· Forklift or pallet jack to lift 77 kg (170 lbs.) - the weight of a
fully loaded shipping crate
· A hoist capable of lifting at least 45 kg (100 lbs.) - the weight
of the laser system
· A cart capable…

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC


Supplies 48 volts to RF power module.
Yes
1256349 J-3
DCPS Accessory Kit,
3 meters
Liquid-cooling
System/Chiller
1 Provides temperature regulated liquid coolant to laser system No
Coolant kit 1
Filters particles from coolant - 30 micron or better…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Utility Requirements and System Installation
43
WARNING!
Do not plug or unplug the laser to RF power module connector
cable when the laser is powered on. This could serious electrical
shock and/or damage the laser system.
Table 4. E-400 Head Indicators and Connectors…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…that supplies control and input modulation signals from
the user to the RF power supply and supplies status information from the
laser system.
7
Power Indicator
LEDs
LEDs illuminate when 48 VDC is applied to the RFPS terminals and
when the Connector Cable (Item 9)…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions