…CO 2, and other lasers up to 6 kW.
* Power handling up to 6 kW (model dependent)
* Model with BB+ Coating provide highest power density threshold
* Spectrally flat broadband coating from 190 nm to 11 microns
* Large 50 mm diameter active area
* USB, RS-232, and DB25 configurations…
…nm. This laser features pulse energies greater than 30 µJ, high repetition rates of up to 80 kHz, and pulse duration of 1.5 ps. The excellent beam quality of this laser (M² <1.3) allows for focusing the beam onto very small areas to reach peak power densities sufficient for virtually any material.
…supplied with a certificate of calibration. The useful spectral range of the attenuator is 400-1800 nm. The attenuator can be used with power densities as high as 100 MW/cm 2. 1000:1 Attentuator (RoHS) For OP-2 and LM-2 Optical Sensors Name 1000:1 Attenuator (RoHS) Description Attentuator for LM-2…
…wavelength applications like low frequency (low wavenumber) THz-Raman ® spectroscopy. With laser line attenuation of up to 99.9999% (optical density: OD4) and transition width of 4 Free Space Aperture Diameter Standard: 9 mm in 1″ mount, Custom sizes available SureBock™ Specifications Datasheet…
…stability. This delivers consistent process conditions and facilitates the production of parts at high spatial resolution and with high component density. In addition, CREATOR works directly from your CAD files, and using its own internal 3D printing module integrates with the supplied APP SUITE…
…up to 15 mm
* Massive and proven mineral cast set-up
* Only 3 side accessibility necessary (minimizes production floor and allows high package density)
* Laser Source - Available in StarFiber 180/320 FC fiber laser High-Precision Laser Tube Cutting Systems with High Throughput Rate - Up to 50 %…
…disk systems are equipped with 780 nm laser diodes. These diodes are compact, reliable and inexpensive. However, they impose a limit on memory density due to the achievable spot size (numerous other factors also influence memory capacity). Changing to visible light sources would overcome the…
…and BioRay Laser Diode Modules Enhanced Magnetic Resonance Imaging (MRI) Coherent laser bars and systems, with increasingly higher power-spectral density, enables exciting new possibilities. Unlike the mature technology of conventional MRI, enhanced MRI technology and applications are still evolving…
--> Wafer and Reticle Inspection - DPSS, ion and optically pumped semiconductor lasers enable front-end semiconductor manufacturing. In front-end semiconductor manufacturing, lasers are mainly used in two applications: in lithography tools and in inspection. There are many different inspection steps…
LabMax PC Software Installation and Quick Start Guide
Do not exceed the power/energy density limits
of the sensor.
…information is displayed on the Power Density plot
A. M2 Beam propagation factor for the R-beam whose
power density is being measured.
B. The Reference plane Power Density. This value
represents the Power Density at the Scan Head front
Standard Mode <4
High Speed Mode <8
Snapshot Mode <16
Maximum Power Density (kW/cm2) 0.2 (150W)
Maximum Peak Power Density (kW/cm2) 14
Maximum Energy Density (J/cm2) 33 (10 ns; 1064 nm)
Rise & Fall Time (µs) 50
Detector Coating BB