Search Results

1 - 12 of 16 Products for 'Density' Page 1 of 2 |

Density

UVblade Excimer Laser

UVblade Excimer Laser

…(nm) 308 308 308 308 308 Laser Pulse Energy (mJ) 580 580 1000 1000/2000 (high power model) 2000 Repetition Rate (Hz) 200 200 600 600 600 Energy Density (mJ/cm 2) 370 340 330 340/320 (high power model) 315 Beam Length (mm) 250 380 465 750 950 Beam Width (µm) 400 300 400 250/500 (high power model)…

VarioLas UV material processing

VarioLas UV material processing

…30 5 - Working Distance (mm) 50 50 150 Max. Repetition Rate (Hz) 100 100 100 Max. Energy Density (mJ/cm 2) at 193 nm 1000 1000 230 Max. Energy Density (mJ/cm 2) at 248 nm 3500 3500 600 Max. Energy Density (mJ/cm 2) at 308 nm 3000 3000 500 Energy Stability (%, 1 sigma) at 193 nm 2 2 2 Energy…

SureBlock™ XLF Notch Filter Systems

SureBlock™ XLF Notch Filter Systems

…Parameter 488 nm 514 nm 532 nm 633 nm 78X nm Spectral Transition Width (center to 50% transmission) 4 >4 >4 >4 >4 Expected System Optical Density >8 >8 >8 >8 >8 Free Space Aperture Diameter Standard: 9 mm, custom sizes available. Fiber Input/Output Connector Type Recommended: FC/PC, others…

Beam Diagnostic Accessories

Beam Diagnostic Accessories

…each. Attenuator Selection Attenuation is selected on the basis of power density in W/cm2 or energy density in J/cm 2. The attenuation from the camera’s Low-Distortion Face Plate (LDFP) will allow an average power density of up to 1.2 mW/cm 2. There are then only two more steps to attenuation…

Azure Laser

Azure Laser

…wavelengths miss. And, with its shorter wavelength, the Azure improves disc mastering, allowing CDs and DVDs to have higher information storage density than those produced with traditional 351 nm and 413 nm wavelength lasers. The Azure features the Sentinel system, an on-board series of automated…

GeoLasHD excimer ablation laser system

GeoLasHD excimer ablation laser system

…Analysis Ablation-Material Removal Ceramic Composite Glass Metal Semiconductor --> Features & Benefits Model GeoLasHD Wavelength (nm) 193 Energy Density on Sample (J/cm 2) 1 - 50 Spot Diameter on Sample (µm) 2 - 160 Optical Resolution (µm) 1 Pulse Energy Stability (%, rms) 1 Beam Homogeneity (%,…

PowerMax-Pro USB/RS Sensors

PowerMax-Pro USB/RS Sensors

…<8 <8 <8 <8 <8 <8 Snapshot Mode <16 <16 <16 <16 <16 <16 Maximum Power Density (kW/cm²) 0.2 (150W) 0.2 (150W) 0.2 (150W) 0.2 (150W) 0.2 (150W) 0.2 (150W) Maximum Peak Power Density (kW/cm²) 14 14 14 14 14 14 Maximum Energy Density (J/cm²) 33 (10 ns; 1064 nm) 33 (10 ns; 1064 nm) 33 (10 ns; 1064 nm) 33…

kW PowerMax Pro Sensor

kW PowerMax Pro Sensor

…Peak Power (kW) 1 5 Noise Equivalent Power Standard Mode (10 Hz) <50 mW High Speed Mode (20 kHz) <0.5W Snapshot Mode (625 kHz) <1.5W Maximum Power Density (kW/cm²) 5.0 at 1 kW avg. power 2.4 at 3 kW avg. power Rise Time (μs) ≤20 Fall Time (μs) ≤20 Protective Front Window Available for 1070 nm model…

LaserCam-HR II

LaserCam-HR II

…features are: • Plateau Uniformity • Flatness Factor • Edge Steepness • Beam Uniformity • Effective Irradiation Area • Effective Average Power/Energy Density Adjustable Trigger Delay An adjustable Trigger Delay allows for a delay to be added (µseconds) to the default trigger delay of the LaserCam-HR…

LaserCam HR-InGaAs

LaserCam HR-InGaAs

…features are: • Plateau Uniformity • Flatness Factor • Edge Steepness • Beam Uniformity • Effective Irradiation Area • Effective Average Power/Energy Density Adjustable Trigger Delay An adjustable Trigger Delay feature has been added to BeamView-USB 4.4 allowing for a delay to be added (µseconds) to…

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

…produce very high energy per pulse or very high peak fluences. The J-50MB-YAG sensor is rated to withstand the following energy densities: Wavelength Maximum Energy Density 266 nm 1 J/cm 2 355 nm 0.8 J/cm 2 532 nm 2.8 J/cm 2 1064 nm 14 J/cm 2 The J-50MB-IR is specifically designed for high damage…

The Staccato Laser

The Staccato Laser

…nm. This laser features pulse energies greater than 30 µJ, high repetition rates of up to 80 kHz, and pulse duration of 1.5 ps. The excellent beam quality of this laser (M² <1.3) allows for focusing the beam onto very small areas to reach peak power densities sufficient for virtually any material.

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions