Search Results

1 - 6 of 6 Products for 'Detector Coating' Page 1 of 1 |
  • 1
Related Categories: Powermax Pm30 | Pm10 | Lm10 | Pm30 | Pm150-50c

Detector Coating

PowerMax-Pro USB/RS Sensors

PowerMax-Pro USB/RS Sensors

…1064 nm) 33 (10 ns; 1064 nm) 33 (10 ns; 1064 nm) 33 (10 ns; 1064 nm) 33 (10 ns; 1064 nm) Rise & Fall Time (μs) ≤10 ≤350 ≤10 ≤350 ≤50 ≤50 Detector Coating HD HD HD HD BB BB Active Area (mm) 30 x 30 30 x 30 30 x 30 30 x 30 30 x 30 30 x 30 Minimum Beam Size (mm) 2.0 (1.0 mm - up to 3% error) 2.0…

Multipurpose EnergyMax Sensors

Multipurpose EnergyMax Sensors

…allow measurement over a wide range of wavelengths, beam diameters, average power levels and repetition rates.All these detectors feature Coherent’s unique MaxBlack coating, which offers significantly better damage resistance and mechanical durability characteristics compared to black paints.…

High Rep-Rate EnergyMax Sensors

High Rep-Rate EnergyMax Sensors

…average power levels and repetition rates. All these detectors features Coherent’s unique diffuse metallic coating, which offers significantly higher damage resistance than traditional chrome coatings. In addition, the Coherent diffuse metallic coating produces very little specular reflectance, thus…

PowerMax-Pro Sensor

PowerMax-Pro Sensor

…users can trace the pulse shape of modulated lasers at pulse repetition frequencies up to 25 kHz. In traditional thermopile detectors, heat is generated in the absorbing coating when it is struck by the laser. The heat must then move through the thick aluminum or copper substrate out to the edges, a…

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

…throughout the visible and near-IR, or throughout the near-IR and mid-IR, without the need to change diffusers. Both these detectors mate Coherent’s unique MaxBlack coating with a novel diffuser to produce superior damage resistance characteristics. This enables operation with lasers that produce…

kW PowerMax Pro Sensor

kW PowerMax Pro Sensor

…with no overshoot. This capability provides nearly instantaneous high power measurement. In traditional kW thermopile detectors, heat is generated in the absorbing coating when it is struck by the laser. The heat must then move through the thick copper substrate out to the edges, a distance…