Search Results

13 - 23 of 23 Products for 'Field Max Ii To' Page 2 of 2 |

Field Max Ii To

FieldMaxII-P User Manual

FieldMaxII-P User Manual

…easy-to-use digital energy meter designed for field service and
production applications.
In this section:
· Front panel (p. 3-2)
· Right side panel (p. 3-4)
· Left side panel (p. 3-5)
There are also instructions on how to replace the alkaline batteries
(p. 3-5) and…

COHR DiamondCx-10LQS DS 0118 3.pdf

COHR DiamondCx-10LQS DS 0118 3.pdf

…Non-Condensing, 95
Shipping/Storage Environment -10 to +60°C (14 to 140°F), Non-condensing
Coolant7 Distilled water with 10% OptiShield+7
Coolant Flow Rate 5.7 l/min (1.5 gpm)
Maximum Coolant Pressure 414 kPa (60 psig)
Max. Pressure Differential (at 1.5 gpm) <103 kPa (15…

COHR DIAMOND E-1000 DS 1118 1.pdf

COHR DIAMOND E-1000 DS 1118 1.pdf


RADIATION. AVOID EYE OR SKIN EXPOSURE
TO DIRECT OR SCATTERED RADIATION.
CLASS 4 LASER PRODUCT PER EN
IEC60825-1:2007/EN60825-1:2007
635 nm to 670 nm VISIBLE (1 mW)
9.1 µm to 10.8 µm INVISIBLE
2000W MAX. AVG. 6J MAX. 1 ms PULSE
Diamond E-1000/E-1000i Datasheet…

MerMAIDs: a family of metagenomically discovered marine anion-conducting and intensely desensitizing channelrhodopsins

MerMAIDs: a family of metagenomically discovered marine anion-conducting and intensely desensitizing channelrhodopsins

…adjacent two data points of a measurement series.
Action spectra were normalized to the maximum response and fitted with a threeparametric Weibull function to determine the maximum response wavelength
(max
). Kinetic time constants were determined by mono or bi-exponential fits. For…

COHR DiamondCx-10LDE plus DS 0219 1.pdf

COHR DiamondCx-10LDE plus DS 0219 1.pdf


Altitude
Humidity
5°C to 45°C (41 to 113 °F)
2000 m (6500 ft)
Non-condensing 95%
Shipping/Storage Environment -10°C to +60°C (14 to 140°F), Non-condensing
Coolant
Coolant Flow Rate
Maximum Coolant Pressure
Max. Pressure Differential (at 1.5 gpm)

Bio Photonics - May / June 2015

Bio Photonics - May / June 2015

…precision at microprocessing," said Dr. Max
Kahmann, product manager of TruMicro
at Trumpf GmbH in Ditzingen, Germany.
"Especially processes where any kind of
thermal influence is extremely critical,
femtosecond pulses open the field. Some
materials (e.g., nitinol) are…

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

…Time (10% to 90%)(µsec) <1
Modulation Depth (extinction ratio) , complete On/Off
RMS Noise
20 Hz to 10 MHz <
_0.1%
10 MHz to 500 MHz <1.0%
Long-Term Power Stability (8 hours) <±2%
Warm-Up Time (minutes) <5
Spatial Mode (far field) TEMoo

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…Time (10% to 90%) (sec) <1
Modulation Depth (extinction ratio) , complete On/Off
RMS Noise
20 Hz to 10 MHz <
_0.1%
10 MHz to 500 MHz <1.0%
Long-Term Power Stability (8 hours) <±2%
Warm-Up Time (minutes) <5
Spatial Mode (far field) TEMoo

VerdiFamily DS

VerdiFamily DS

…vertical, >100:1
Operating Voltage (VAC) 100 to 240
Frequency (HZ) 50/60
Max. Operating Current (A)(@ 100 VAC) 7.8 13
PZT Input Voltage7 (V/channel) 0 to +100
PZT Tuning Range7 (GHz) >8.2 >6.4
PZT Bandwidth7 DC to 20 kHz
Power Consumption
Maximum 780W…

COHR CUBE DS 0818 4.pdf

COHR CUBE DS 0818 4.pdf

…RMS Noise (%)
20 Hz to 10 MHz
10 MHz to 500 MHz
<0.1
<1.0
<0.1
<1.0
<0.1
<1.0
Long-Term Power Stability (%) (8 hours) <±2 <±2 <±2
Warm-Up Time (minutes) <5 <5 <5
Spatial Mode (far field) TEM00 TEM00 TEM00

Vitesse800 DSrevC

Vitesse800 DSrevC

…1.05-1.06 µm
MAX. POWER
1.0W
1.0W
10.0W
MAX. PULSE
1 mJ/10 ns
1 mJ/10 ns
2 mJ/10 ns
1 Repetition rate must be specified when ordered and will be optimized prior to shipment.
2 A Gaussian pulse shape de-convolution factor (0.7) is used to determine…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions