Search Results

1 - 11 of 11 Products for 'Fieldmate Power Meter' Page 1 of 1 |
  • 1

Fieldmate Power Meter

FieldMate DS 4.qxd

FieldMate DS 4.qxd

…SmartSensor adapter FieldMate Coherent Laser Measurement and Control FieldMate This latest member of Coherent's power meter line-up combines both a steady digital display and fast analog meter to provide the most economical way to make power measurements. These small, rugged power meters are ideal…

Microsoft Word - Coherent Thermopile Sensors Enable Laser Power Measurement up to 6 kW

Microsoft Word - Coherent Thermopile Sensors Enable Laser Power Measurement up to 6 kW

…and RS-232. The DB25 versions are compatible with several of the Coherent standalone power meters, including LabMax-TOP, LabMax - TO, LabMax-Pro SSIM, FieldMaxII-TOP, FieldMaxII-TO, FieldMaxII-P, and FieldMate, making them a suitable choice for both laboratory use and field service. The USB equipped…

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…battery power
· Auto ranging
Laser Power Meter
FieldMate
FieldMate combines a digital display and analog meter with sophisticated
digital processing to enable rapid, sensitive laser adjustment.This meter
also offers an economical way of measuring laser power when…

Vitara Preinstall.book

Vitara Preinstall.book

…available.
[ ] Hemostat
[ ] Lens Tissues
[ ] Powderless latex or nitrile gloves
Laser Equipment
[ ] Power meter and head (e.g., Coherent FieldMate with LM10,
LM2 heads).
[ ] Intensity calibrated spectrometer (e.g., StellarNet Blue-wave
NIR2-14).
[ ] A…

Libra PreInstallation.book

Libra PreInstallation.book

…methanol and acetone available.

Hemostat

Lens Tissues

Powderless latex or nitrile gloves
Laser Equipment

Power meter and head (e.g., Coherent FieldMate with LM10,
LM2 heads).

An oscilloscope (300 MHz or higher)
Table 3-5. Pre-installation Checklist
ACTIVITYAND…

COHR Air-CooledThermopileSensors DB25 DS 0819 2.pdf

COHR Air-CooledThermopileSensors DB25 DS 0819 2.pdf

…FieldMaxII-TOP/TO/P, and FieldMate meters. FEATURES · Maximum powers from 2 W to 150 W · Minimum power down to 10 mW · Broadband and Excimer coatings · Convective air-cooled · 0.15 µm to 11 µm spectral range · 19 mm and 50 mm diameter active areas · DB25 (meter required) · RoHS Compliant…

COHR Air-CooledThermopileSensors DB25 DS 1119 3.pdf

COHR Air-CooledThermopileSensors DB25 DS 1119 3.pdf

…FieldMaxII-TOP/TO/P, and FieldMate meters. FEATURES · Maximum powers from 2 W to 150 W · Minimum power down to 10 mW · Broadband and Excimer coatings · Convective air-cooled · 0.15 µm to 11 µm spectral range · 19 mm and 50 mm diameter active areas · DB25 (meter required) · RoHS Compliant…

Thermal SmartSensor Adapter DSrevA 4.qxd

Thermal SmartSensor Adapter DSrevA 4.qxd

…FieldMax-TOP, FieldMax-TO, and FieldMate. This adapter can be used with multiple sensors due to its ability to adaptively read the sensor EEPROM contents and program itself when powered on. Note that beam position information is not available when using these meters. At the time of this printing,…

ThermalSmartSensorAdapterQuickReferenceGuideRevAC.fm

ThermalSmartSensorAdapterQuickReferenceGuideRevAC.fm

…a sensor and a meter.
o
Connect the DB-25 connector on the end of the adapter cable
to the meter.
Connect the adapter to the sensor.
n
n
Apply power to the meter; wait two seconds.
p
Take the measurement and observe the result on the meter
readout.…

COHR OP-2 LM-2 OpticalSensors DS 0719 1.pdf

COHR OP-2 LM-2 OpticalSensors DS 0719 1.pdf

…with FieldMaxII and FieldMate meters.
Designed for use with multiple sensors, this adapter can read the sensor
EEPROM contents and program itself when powered up via the meteconnection.
Note: Beam position information is not available when using these meters.
1000:1 Attenuator…

COHR OP-2 LM-2 OpticalSensors DS 1119 2.pdf

COHR OP-2 LM-2 OpticalSensors DS 1119 2.pdf

…with FieldMaxII and FieldMate meters.
Designed for use with multiple sensors, this adapter can read the sensor
EEPROM contents and program itself when powered up via the meteconnection.
Note: Beam position information is not available when using these meters.
1000:1 Attenuator…