…System Meter accuracy + sensor accuracy Software This current version of the Setup file contains updated and improved 32-bit and 64-bit Windows XP and Windows 7 drives. This update includes:
* Improved compatibility with National Instruments LabView in 64-bit environments
* Faster FieldMax PC…
…interface our meter in LabView programming. Support for multiple simultaneous meters is supported by this LabView library. The meter also contains an analog output and rechargeable battery. This combination of features makes FieldMaxII-TO the most powerful and versatile laser meter in its price…
…sensors), and the meters listed in the meter compatibility matrix. Contact Us About This Product PRICE HERE Close Coherent Meter Compatibility Thermal SmartSensor adapter allows operation of specific thermal and optical sensors with the following Coherent meters. These meters require the listed…
…Replacement AC Power Adapters A specialized adaptor for Coherent Power Meters. Name AC Power Adapter AC Power Adapter Description AC Adapter for LaserMate, FieldMaster, LabMaster Ultima AC Adapter for FieldMate, FieldMax, FieldMaxII, LabMax, and 3sigma Part Number 1061482 1105427 Price call call…
…as well as wavelength compensation factors.These sensors are compatible with Coherent LabMax-Pro SSIM, LabMax-TOP, FieldMax-TOP, and FieldMaxII-P meters. USB and RS232 enabled models are also available. The 25 mm and 50 mm diameter sensors accept an optional heatsink, which can be easily attached by…
…meter are not included in the legacy meters of the past. This includes such meters as the FieldMax II, FieldMate, LabMax TOP, and others. Limitations of Legacy Meters This section describes some of the limitations you can expect when using the PowerMax-Pro sensors with legacy meters. Legacy meters…
…power meter and detectors that is ideally suited for the
Ion product family.
Table 9. Recommended Power Meter
0.3 - 10.6 µM
FOR ALL INNOVA MODELS
Fieldmax IITM TOP Power Meter…
…be adjusted by returning to the Watts mode.
When FieldMax II-TOP is prepared for the first measurement, the TRIG? annunciator displays at the top of
the screen. The TRIG annunciator displays during the measurement, showing that the meter is currently
integrating the reading. The Zero…
…in cases mend using th e meter can b typically offer Our sales dep s still don't se oftware is bei ems persist, p FieldMaxII me ter being used able to help d ave gone thro eeded for Wi ginning of 20 rk with the 64 w circuit board rd uses a USB the FieldMax the FieldMax 64-bit operat k at its serial…
…a sensor and a meter.
Connect the DB-25 connector on the end of the adapter cable
to the meter.
Connect the adapter to the sensor.
Apply power to the meter; wait two seconds.
Take the measurement and observe the result on the meter
Thermal SmartSensor adapter
allows operation of specific thermal
and optical sensors with the following
Coherent meters. These meters require
the listed firmware level or higher.
1 The EPM2000 meter is not equipped to function…
Please Read Before Continuing
Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.