Search Results

Refine
1 - 12 of 12 Products for 'Filed Max' Page 1 of 1 |
  • 1

Filed Max

FieldMaxII-TO

FieldMaxII-TO

…Several bug fixes including an auto-range timeout error that affected some customers using remote PC control Specifications Max. Measurable Power (with thermopile sensor) 30.0 kW Max. Measurable Power (with optical sensor) 300.0 mW Min. Measurable Power (with thermopile sensor) 10 µW Min. Measurable…

FieldMaxII-P

FieldMaxII-P

…Measurement Resolution 0.1% of full scale Max. Rep. Rate (pulsed energy measurement) 300 Hz (every pulse) Accuracy - Digital Meter ±1.0% of reading Accuracy - System Meter accuracy + sensor accuracy Software This current version of the Setup file contains updated and improved 32-bit and 64-bit…

LabMax-TO

LabMax-TO

…laser output. Data analysis can be achieved via statistical and trend analysis and stored in onboard flash memory for future retrieval with the File Manager tool. Data can also be analyzed directly on a PC through USB and RS-232 serial connections, or by logging data to a USB flash drive attached…

LabMax-TOP

LabMax-TOP

…laser output. Data analysis can be achieved via statistical and trend analysis and stored in onboard flash memory for future retrieval with the File Manager tool. Data can also be analyzed directly on a PC through USB and RS232 serial connections, or by logging data to a USB flash drive attached…

FieldMaxII-TOP

FieldMaxII-TOP

…battery is drained. The meter can also operate with six standard AA batteries. Specifications Max. Measurable Power (with thermopile sensor) 30.0 kW Max. Measurable Power (with optical sensor) 300.0 mW Max. Measurable Energy (with pyroelectric sensor) 300.0J Min. Measurable Power (with thermopile…

00 M5C Pre Install.book

00 M5C Pre Install.book

…material processing
application using the LMT system, in which the system follows a set
of instructions specified in an .LMC file.
job file An .LMC file used by the LMT system to perform a job.
kerf The width of the resulting cut from laser processing.
kg Kilogram(s) = 103…

MerMAIDs: a family of metagenomically discovered marine anion-conducting and intensely desensitizing channelrhodopsins

MerMAIDs: a family of metagenomically discovered marine anion-conducting and intensely desensitizing channelrhodopsins

…from
ref. 93). max
, maximum response wavelength; g max
for all MerMAIDs. Mean values (thick lines) ± standard deviation (whiskers) are shown, and singlemeasurement data points are represented as dots. Source data are provided as a Source Data file (d-g)
NATURE COMMUNICATIONS…

GUI 3.88 Revision History.pdf

GUI 3.88 Revision History.pdf

…and saving configuration and sequence files for Hyper NX Fixed the "Get Older Data" button in the EventViewerForm for HyperNX Don't allow the HyperNX Sequence Editor to be used unless the GUI is connected using USB or Ethernet, to avoid displaying files from the wrong laser Data in chart windows…

COHR LabMaxProApp DS 0117 3.pdf

COHR LabMaxProApp DS 0117 3.pdf

…and view data log files in the app, and send data log files for analysis in the desktop PC application
· Obtain Snapshot data with PowerMax-Pro sensors and analyze data using scope cursors
· The mobile app also performs full pulse analytics on captured Snapshot files such as rise time,…

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…0.1
Display 112 x 78 mm backlight graphic LCD, 480 x 320 pixels.
Adjustable contrast and viewing angle
Measurement Analysis Min., max., mean, range, std. dev., dose, stability; trending, tuning, beam position
Computer Interface GPIB, USB and RS-232 USB and RS-232
Pulse…

ModeMaster PC User Manual

ModeMaster PC User Manual

…error |/| this
produces is (2x2
x2/f2). Limiting the fractional error to
< 1% then gives the Gamma limit criterion. Note that

max is largest at x2 = 0 since the slope of the vs. x2
curve is zero and is smallest at Z02 = ZR2 since x2 is
largest.
J. INT. Internal…

LabMax Meters DS

LabMax Meters DS

…(mm) 0.1
Display 112 x 78 mm backlight graphic LCD, 480 x 320 pixels. Adjustable contrast and viewing angle
Measurement Analysis Min., max., mean, range, std. dev., dose, stability; trending, tuning, beam position
Computer Interface GPIB, USB and RS-232 USB and RS-232
Pulse…