Search Results

Refine
1 - 12 of 45 Products for 'Flow Sensor' Page 1 of 4 |

Flow Sensor

00 Laser Cooling.book

00 Laser Cooling.book

…Cooling Guidelines
5
3. Do not allow the flow rate to fall below the minimum specified
value. All Coherent ion lasers have flow sensors inside the
power supply. When a sensor detects a condition of low water
flow, it shuts off the laser to protect the system from damage.…

PowerMax-Pro Sensor

PowerMax-Pro Sensor

…of a semiconductor photodiode. This high-speed, thin film sensor technology for laser power measurement (50 mW to 15 kW) utilizes a unique thermal flow design enabling fast, high power measurement, with high damage resistance. The sensor is so fast, less than ten microseconds in the case of the “HD”…

kW PowerMax Pro Sensor

kW PowerMax Pro Sensor

…centimeters, to where the thermocouple array is located. This heat flow takes time, which is why thermopiles take a minute or longer to steady out after the laser is turned on. The high response speed of PowerMax-Pro sensors is particularly advantageous in commercial applications, where it enables…

Off-the-shelf OEM Power Sensors

Off-the-shelf OEM Power Sensors

…PM1K-36B (1098333) Related Materials Drawings PM10-19A PM10-19B PM150-19A PM150-19B PM150-50 PM150-50B PM150-50XB White Papers Water-cooled Power Sensor Flow Rates Call +1 800 527 3786 | Outside the U.S. +1 408 764 4983 Coherent has locations across the globe that are available to provide support…

Position Sensing Water Cooled Thermopile Sensors 5kW

Position Sensing Water Cooled Thermopile Sensors 5kW

…LM-1000 (1098409) LM-2500 (1098437), LM-5000 (1098421) Related Materials White Papers Damage Threshold of kW Thermopile Power Sensors Water-cooled Power Sensor Flow Rates Call +1 800 527 3786 | Outside the U.S. +1 408 764 4983 Coherent has locations across the globe that are available to provide…

High Power Water-Cooled Thermopile Sensors to 5kW

High Power Water-Cooled Thermopile Sensors to 5kW

…High Power Water-Cooled Thermopile Sensors to 5 kW (DB25) Datasheet High Power Water-Cooled Thermopile Sensors to 5 kW (USB/RS) Related Materials Drawings PM Dimensions White Papers Damage Threshold of kW Thermopile Power Sensors Water-cooled Power Sensor Flow Rates Call +1 800 527 3786 | Outside…

Water-Cooled Thermopile Sensors to 200W (RoHS)

Water-Cooled Thermopile Sensors to 200W (RoHS)

…products. PM10-19C (1098397) PM150-19C (1098444) PM150-50C (1098412), PM150-50XC (1098443) LM-200B (RoHS) (1163371) Datasheet Water Cooled Power Sensor Flow Rates Related Materials Drawings PM10-19C PM150-19C PM50-50C PM150-50C Call +1 800 527 3786 | Outside the U.S. +1 408 764 4983 Coherent has…

Large Area High Power Water-Cooled Thermopile Sensors 5kW

Large Area High Power Water-Cooled Thermopile Sensors 5kW

…100 and 5K 200 Related Materials Drawings Large-Area High-Power Water-Cooled Thermopile Sensors to 5kW (RoHS) White Papers Water-cooled Power Sensor Flow Rates Damage Threshold of kW Thermopile Power Sensors Call +1 800 527 3786 | Outside the U.S. +1 408 764 4983 Coherent has locations across the…

PowerMax-USB-RS-Sensors-Product-Guide.pdf

PowerMax-USB-RS-Sensors-Product-Guide.pdf


These kilowatt thermopile sensors are water-cooled for measuring laser
output up to 1 kW and are excellent for use with CO2 and Nd:YAG lasers.
Tap or distilled cooling water is recommended with these sensors - DI
water can not be used. Flow rates are power dependent and range…

COHERENT LaserPowerSensors FlowRequirements FittingSpecs PinAssignments 04-2017mp.pdf

COHERENT LaserPowerSensors FlowRequirements FittingSpecs PinAssignments 04-2017mp.pdf

…water flow rate based on the needs of the laser. This can change the flow rate in the sensor and cause erroneous measurements. Adding a sensor head to a laser cooling supply can also cause problems with thermal strain on the cooling system. Fitting and Water Flow Specifications The following flow

00 LMT Pre.book

00 LMT Pre.book

…must be equal to ±0.003".
Beam
Alignment
Range
Level Bed
Laser Flow Verify flow condition of chiller to laser.
Confirm flow sensor operation.
Focus Test and adjust focus sensor. Record focus
offset.
Laser Power Test laser power out of nozzle and record…

00 M5C Pre Install.book

00 M5C Pre Install.book

…Confirm Utilities as specified in Facility
Requirements (Table 3-1). Record
voltages.
Inspection Flow Verify flow condition of chiller to laser.
Confirm flow sensor operation.
Exhaust Ducting Hook up exhaust ducting.
HMI Install Install the HMI onto the
M5C LMT…