Search Results

Refine

Result Type

1 - 7 of 7 Products for 'Fm Power Meter' Page 1 of 1 |
  • 1

Fm Power Meter

ThermalSmartSensorAdapterQuickReferenceGuideRevAC.fm

ThermalSmartSensorAdapterQuickReferenceGuideRevAC.fm

…a sensor and a meter.
o
Connect the DB-25 connector on the end of the adapter cable
to the meter.
Connect the adapter to the sensor.
n
n
Apply power to the meter; wait two seconds.
p
Take the measurement and observe the result on the meter
readout.…

FMII-TO QuickStartGuideRevAD.fm

FMII-TO QuickStartGuideRevAD.fm

…Quick Start Guide FieldMaxII-TOTM Laser Power Meter This guide presents a "mini-tutorial" that explains how to connect a sensor to your FieldMaxII-TO meter and begin taking measurements within minutes. For indepth information about the FieldMaxIITO meter, refer to the FieldMaxII-TO User Manual…

FMII RechargeableBatteryPackQuickReferenceGuideRevAB.fm

FMII RechargeableBatteryPackQuickReferenceGuideRevAB.fm

…procedure to install
the battery pack into the FieldMaxII unit.
Lay the meter face down on a
flat surface and open the stand.
X
Loosen the screw that secures
the battery cover to the meter.
Y
Take off the battery cover.
Z
Remove the six batteries…

FMII-TOP QuickStartGuideRevAD.fm

FMII-TOP QuickStartGuideRevAD.fm

…FieldMaxII-TOPTM Laser Power/Energy Meter This guide presents a series of "mini-tutorials" that explains how to connect a sensor to your FieldMaxII-TOP meter and begin taking measurements within minutes. For in-depth information about the FieldMaxII-TOP meter, refer to the FieldMaxII-TOP User Manual…

Quick Setup.fm

Quick Setup.fm

…equilibrate.
7. Once the targeted temperature is reached, the system should be left to thermally stabilize for
two hours.
8. Setup a power meter to catch the output from the Vitesse head. Switch the P/S key from
"Standby" to "ON" and press the "Shutter Open" button. The system…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

…if power is lost
while the meter is in use, it will automatically turn back on again
when power is restored. The benefit of this mode is that, following
a power loss, remote installations can communicate with the meter
without having to manually recycle instrument power.

00 Sabre Preinstall.book

00 Sabre Preinstall.book

…to have an accessory power meter available, it should be
rated for the full power output of the laser. Coherent Power Meters
are listed in Table 9.
Table 9. Recommended Power Meters
COHERENT POWER METERS
FOR ALL INNOVA MODELS
MAXIMUM POWER
(IN WATTS)
LaserMate…