Search Results

Refine

Result Type

1 - 12 of 14 Products for 'Focal Length Divergence' Page 1 of 2 |

Focal Length Divergence

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…One Dimensional Diverging Flat Top Order code: 1DDFT - Divergence (E.g., 1DDFT-0.3°)
Two Dimensional Diverging Flat Top Order code: 2DDFT - Divergence 1 x Divergence 2
(E.g., 2DDFT-0.3°x2°)
Imaged Flat Top Order code: FFT - Divergence 1 x Divergence 2 - Focal Length
(E.g.,…

ModeMaster PC User Manual

ModeMaster PC User Manual


PC, with the input waist within a Rayleigh range of the input lens,
the focal diameter 2W02 inside the instrument is related to the input
beam divergence 1 by:
where f is the effective focal length of the ModeMaster PC lens.
Thus the horizontal portion of the lower boundary,…

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

…Dimensional Diverging Flat Top Order code: 1DDFT - Divergence (E.g., 1DDFT-0.3°)
Two Dimensional Diverging Flat Top Order code: 2DDFT - Divergence 1 x Divergence 2
(E.g., 2DDFT-0.3°x2°)
Imaged Flat Top Order code: FFT - Divergence 1 x Divergence 2 - Focal Length
(E.g.,…

Properties-of-Structured-Light-Application-Note.pdf

Properties-of-Structured-Light-Application-Note.pdf

…the input beam the smaller the Gaussian focus at a given working distance. The input beam
diameter can be changed by the divergence of the diode or the focal length of the collimator. Coherent has
optional collimators that can be selected to produce thinner lines for more demanding…

00 M5C Pre Install.book

00 M5C Pre Install.book


focal length The distance from the secondary nodal point of a lens to the primary
focal point; in a thin lens, the focal length is the distance between the
lens and the focal point
focal point The point toward which radiation converges or from which radiation
diverges or…

Microsoft Word - Understanding Laser Beam Parameters Leads to Better System Performance and Can Save Money Final.doc

Microsoft Word - Understanding Laser Beam Parameters Leads to Better System Performance and Can Save Money Final.doc

…"collimated beams".
To measure divergence correctly with a camera based beam analyzer (profiler), a lens or confocal mirror with known
focal length must be introduced into the laser path. The sensor plane of the camera is then placed at the focal length
of the lens or mirror to…

SPIE DSS 2013 Final submitted 4-25-2013x

SPIE DSS 2013 Final submitted 4-25-2013x

…Note that these are 3mm cavity length bars and achieving low smile on
micro-channel coolers is difficult. The slow-axis divergence, which is impacted by many factors such as operating
current (or current density), base temperature, emitter width and focal length of the SAC lens array, was…

Sample manuscript showing specifications and style

Sample manuscript showing specifications and style

…forms a spatial filter.
The implication for the external cavity is that the collimated beam size can be small (small focal length) to reduce the
physical cavity length of the ECL.
3. NON-DISPERSIVE SELF-ALIGNED LASER CAVITIES
A modification of the architecture shown on Fig.1(b)…

Microsoft Word - VHG-FAC Paper 07-01-05 .doc

Microsoft Word - VHG-FAC Paper 07-01-05 .doc

…of 30% (19 emitters, 150 µm emitter width,
500 µm pitch) and a fast-axis divergence angle of 65° (95% power content). The array was passively cooled and
mounted on a CS-mount. The VHG-FAC had a focal length of f=900 µm. Fig. 5 shows the power vs. current
characteristics for three…

Mode Master White Paper July 2011 final.pdf

Mode Master White Paper July 2011 final.pdf

…beam focused by an aberration free lens is
given by:
0
w
f
w
l
theoretica

,
Where: f is the lens focal length
w0
is the input beam radius at the lens
w is the radius of the focused spot
With the inclusion of the M2 term, this now…

Mode-Master-Whitepaper FORMFIRST.pdf

Mode-Master-Whitepaper FORMFIRST.pdf

…beam focused by an aberration free lens is
given by:
0
w
f
w
l
theoretica

,
Where: f is the lens focal length
w0
is the input beam radius at the lens
w is the radius of the focused spot
With the inclusion of the M2 term, this now…

Coherent Optoskand Brochure 10-20-17.pdf

Coherent Optoskand Brochure 10-20-17.pdf

…n/a
Lens Diameters 25 mm & 50 mm n/a
Max. Power (CW)
d25: 10 kW
d50: 6 kW
d25: 5 kW
d50: 6 kW
n/a
Focal Lengths 50-250 mm n/a 60-500 mm n/a
Asymmetric
Aspect Ratios
1:1.5/2.0/2.5/3.0 (f170)
1:1.6/2.0/2.6/3.3/4.0 (f226)
n/a n/a n/a…