Search Results

1 - 12 of 19 Products for 'Frequency Drift' Page 1 of 2 |

Frequency Drift

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

…(power supply)
<7A at 90 VAC (chiller)
<2A at 90 VAC (MRU X1)
System Power Consumption 2300W max., 1300W typical
Line Frequency 47 to 63 Hz
Operating Temperature Range 15 to 35°C (59 to 95°F)
Weight of Laser Head 42 kg (93 lbs.)
Weight of Power Supply 41 kg…

00 Laser Cooling.book

00 Laser Cooling.book

…rate cause temperature changes
in the laser head, which may result in problems such as:
· Drift in the laser output power
· Frequency drift in single-frequency operation
· Drift in the output beam direction (beam pointing)
Long term flow rate stability can be measured using…

COHR RLScatalog 2017revA web.pdf

COHR RLScatalog 2017revA web.pdf

…(power supply)
<7 at 90 VAC (chiller)
<2 at 90 VAC (MRU x1)
System Power Consumption (W) 2300 max., 1300 typical
Line Frequency (Hz) 47 to 63
Operating Temperature Range 15 to 28°C (59 to 82°F)
Weight of Laser Head 52 kg (115 lbs.)
Weight of Power Supply 33…

ChameleonUltra DS 16-02-16  F.pdf

ChameleonUltra DS 16-02-16 F.pdf

…(power supply)
<7A at 90 VAC (chiller)
<2A at 90 VAC (MRU X1)
System Power Consumption 2300W max., 1300W typical
Line Frequency 47 to 63 Hz
Operating Temperature Range 15 to 35°C (59 to 95°F)
Non-operating Temperature Range 5 to 40°C (41 to 104°F)
Weight of…

Genesis CX-SLM

Genesis CX-SLM

…the rated power including beam diameter, divergence, and M2. Mode hop-free performance is tested and recorded down to 250 mW with minimized frequency drift. RMS noise is also minimized with a short upper-state lifetime of the gain medium, which is unique and unlike any other solid-state laser. The…

Microsoft Word - Wavelength Control and Locking with Sub-MHz Precision

Microsoft Word - Wavelength Control and Locking with Sub-MHz Precision

…signal(s) generated to cancel any wavelength jitter or drift.
Because of the small displacements required to cancel acoustic noise and the low inertia of the
mirror assembly, the short stack enables cavity length adjustment at frequencies up to 20 kHz.
The total displacement of the…

Innova Sabre brochure

Innova Sabre brochure


any residual frequency drift. The result is
exceptional short-term and long-term
performance.
Long-term frequency stability (drift) in an
ion laser is determined by temperature
changes of the ambient air and cooling
water. Short-term frequency stability (jitter)…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…focusing charts
Bore Sighting (mrad) <3
Operating Temperature (°C) -20 to +45
Storage Temperature (°C) -40 to +70
Wavelength Drift Maximum ±1 nm over entire operating temperature range
Power Supply Voltage (VDC) 5 ±0.5
Adapter is available to supply the unit from…

WP1 MephistoNPRO Final.pdf

WP1 MephistoNPRO Final.pdf

…for the error in the frequency
linewidth of the laser. Not surprisingly, the monolithic
Mephisto laser resonator yields a frequency noise
performance superior to laser resonators made up of
individual mirrors that are bound to vibrate or thermally
drift with respect to each…

ChameleonVision DS 0216 3.pdf

ChameleonVision DS 0216 3.pdf

…(power supply)
<7 at 90 VAC (chiller)
<2 at 90 VAC (MRU x1)
System Power Consumption (W) 2300 max., 1300 typical
Line Frequency (Hz) 47 to 63
Operating Temperature Range 15 to 35°C (59 to 95°F)
Non-operating Temperature Range 5 to 40°C (41 to 104°F)
Weight…

Verdi-G-Series-Lasers-Technology-Proven-in-the-Most-Noise-Sensitive-Applications.pdf

Verdi-G-Series-Lasers-Technology-Proven-in-the-Most-Noise-Sensitive-Applications.pdf

…- stabilizing and manipulating in the
frequency domain the often-forgotten underlying CW
mode structure whose interference produces the modelocked pulse. This involves preventing drifts and jitter
in the carrier envelope offset frequency (see Figure 4).
Figure 4.Typical laser…

COHR ChameleonVision-S DS 0119 3.pdf

COHR ChameleonVision-S DS 0119 3.pdf

…VAC (power supply)
<7 at 90 VAC (chiller)
<2 at 90 VAC (MRU)
System Power Consumption (W) 2300 max., 1300 typical
Line Frequency (Hz) 47 to 63
MECHANICAL PARAMETERS
Weight of Laser Head 52 kg (115 lbs.)
Weight of Power Supply 33 kg (73 lbs.)
Umbilical…