Ask a Question
Coherent

Search Results

Refine

Result Type

1 - 12 of 60 Products for 'Gem Laser' Page 1 of 5 |
Related Categories: Micro Led | Gem-100l | 1000w Co2 | Connector Rf | J Series

Gem Laser

Diamond C100L DS

Diamond C100L DS

…(10.6 µm) Liquid-Cooled RF-Excited OEM Industrial CO2 Laser Features · Outstanding beam quality and stability · Highly compact and lightweight, two-piece package · All-metal seals for long life · Low-cost OEM configuration · Interchangeable laser heads and RF supplies · Linear polarization · Wide…

32311a coverSinglesRR.indd

32311a coverSinglesRR.indd

…remain a leading supplier. The optimum choice of laser depends on the material being marked, whether it is a surface mark (engraved) or a sub-surface mark, and the specific economics of the application. Our DIAMOND J, C and GEM Series of CO2 lasers provide many systems manufacturers with a reliable…

Diamond C100L DS

Diamond C100L DS

…(10.6 µm) Liquid-Cooled RF-Excited OEM Industrial CO2 Laser Features · Outstanding beam quality and stability · Highly compact and lightweight, two-piece package · All-metal seals for long life · Low-cost OEM configuration · Interchangeable laser heads and RF supplies · Linear polarization · Wide…

Diamond C100A DS

Diamond C100A DS

…(2) 460 7900 UK +44 (1353) 658 833 www.Coherent.com VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER RADIATION PRODUCT PER EN60825-1 (1994) CO2 LASER 9.2 - 10.8 MICRONS 175 WATT CW U.S. Patent No. 6,192,061 U.S. Patent No. 6,788,722…

UCLD Catalog.book

UCLD Catalog.book

…Product.Support@Coherent.com or telephone, 1-800-367-7890 (1-408-764-4557 outside the U.S.). Please be ready to provide model and laser head serial number of your laser system as well as the description of the problem and any corrective steps attempted to the support engineer responding to your…

COHR DIAMOND GEM100L-10.6 DS 0817 1.pdf

COHR DIAMOND GEM100L-10.6 DS 0817 1.pdf

…Frost
* Coolant Environmental Temperature 15 to 45°C (59 to 113°F) Altitude <2000 m (6500 ft.) Humidity Non-condensing 1 Derate power by 1% /°C for laser head temperatures above 25°C. 2 Power stability measured at constant duty cycle (15% to 100%) after 10-minute warm-up.
* Dow Frost is a trademark…

10.3.2015 10K

10.3.2015 10K

…remain a leading supplier. The optimum choice of laser depends on the material being marked, whether it is a surface mark (engraved) or a sub-surface mark, and the specific economics of the application. Our DIAMOND J, C and GEM Series of CO2 lasers provide many systems manufacturers with a reliable…

UCLD Catalog.book

UCLD Catalog.book

…Product.Support@Coherent.com or telephone, 1-800-367-7890 (1-408-764-4557 outside the U.S.). Please be ready to provide model and laser head serial number of your laser system as well as the description of the problem and any corrective steps attempted to the support engineer responding to your…

10.3.2015 10K

10.3.2015 10K

…remain a leading supplier. The optimum choice of laser depends on the material being marked, whether it is a surface mark (engraved) or a sub-surface mark, and the specific economics of the application. Our DIAMOND J, C and GEM Series of CO2 lasers provide many systems manufacturers with a reliable…

Diamond C100A DS

Diamond C100A DS

…(9.6 µm) Liquid-Cooled RF-Excited OEM Industrial CO2 Laser Features · Outstanding beam quality and stability · Highly compact and lightweight, two-piece package · All-metal seals for long life · Low-cost OEM configuration · Interchangeable laser heads and RF supplies · Linear polarization · Wide…

Microsoft Word - AppNote012.doc

Microsoft Word - AppNote012.doc

…GPM per 2500 W. This leads to the following equation: Power Water Flow = ----------------- 2500W/GPM Example: Model PM5K-200 is measuring a 4000 W laser. Using 15 degrees F as the maximum temperature change of the outgoing water, the minimum water flow should be: 4000 W ----------------- = 1.6 GPM…

34706a cover.indd

34706a cover.indd

…remain a leading supplier. The optimum choice of laser depends on the material being marked, whether it is a surface mark (engraved) or a sub-surface mark, and the specific economics of the application. Our DIAMOND J, C and GEM Series of CO2 lasers provide many systems manufacturers with a reliable…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions