Search Results

Refine
1 - 12 of 16 Products for 'Heat Sink Sapphire' Page 1 of 2 |

Heat Sink Sapphire

OBIS LX/LS Heat Sink

OBIS LX/LS Heat Sink

…Proven stable performance over time and temperature
* Laser can be mounted on top or side for opposite polarization Datasheet OBIS Heat Sink Drawing OBIS Heat Sink Heat Sink with Fan for Thermal Management - Convenient 69 mm (2.7 inch) beam height Output beam centered on standard table bolt pattern…

Instrument Accessories

Instrument Accessories

…damaging your sensor when measuring unknown beam, insert the test slide into the beam and then examine for damage. EnergyMax Heat Sink Accessories EnergyMax Heat Sink Accessories Accessories to help increase the average power capability of EnergyMax sensors. Fiber Optic Connector Adapters Fiber…

Energy Max Laser Sensors

Energy Max Laser Sensors

…High accuracy, spectral compensation characteristics built into each unit
* Onboard sensors provide automatic temperature compensation
* Modular heat sinks to extend measurement range
* Compact size to enable measurements within instruments
* Molded cable with bend and strain relief protects against…

COHR SapphireDriverUnit Datasheet.pdf

COHR SapphireDriverUnit Datasheet.pdf

…The optional laser emission indicator is located at the end of a
5 m (16.4 ft.) cable which connects to the rear panel of the driver unit.
This indicator shall be mounted at the front of the optional heat sink
near the beam aperture (required for CDRH compliant operation only).

COHR SapphireLP DS 1017 1.pdf

COHR SapphireLP DS 1017 1.pdf

…<5% peak-to-peak; line regulation <0.5%.
6 With factory-provided or other adequate heat sink.
7 Sapphire 488-10/20/25/30 has a maximum baseplate temperature of +55°C (+131°F). Sapphire 488-40/50/75/100/150/200 and 300 mW models are limited to a maximum
baseplate temperature…

COHR SapphireLPX DS 0418 2.pdf

COHR SapphireLPX DS 0418 2.pdf

…Non-Operating Condition
0 to 95, non-condensing
0 to 100, non-condensing
Dimensions (L x W x H)
Laser Head
Controller
Heat Sink (optional)
DC Power Supply (optional)
Cable -- Laser Head to Controller
125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.)
117.8 x…

COHR SapphireSF DS 0719 3.pdf

COHR SapphireSF DS 0719 3.pdf

…Range at 488 nm and ~30% of Rayleigh Range at 532 nm.
6 If user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%.
7 With factory-provided or other adequate heat sink.
Sapphire SF Datasheet

COHR SapphireSF DS 0819 1.pdf

COHR SapphireSF DS 0819 1.pdf

…Range at 488 nm and ~30% of Rayleigh Range at 532 nm.
6 If user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%.
7 With factory-provided or other adequate heat sink.
Sapphire SF NX Datasheet

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

…following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%.
6 With factory-provided or other adequate heat sink.
Sapphire LP
CW Visible Lasers from Deep Blue to Orange
82 www.Coherent.com · tech.sales@coherent.com
Superior Reliability &…

COHR OBIS Galaxy DS 0519 3.pdf

COHR OBIS Galaxy DS 0519 3.pdf

Heat Sink (part number 1193289). See individual OBIS accessory data sheets for details.
NOTE: Sapphire Lasers include: Laser, OEM USB Controller, 2 meter head cable and connector kit. The following needs to be ordered separately:
Sapphire laser power supply (part number 1105375), Sapphire

COHR SapphireFP DS 1017 1.pdf

COHR SapphireFP DS 1017 1.pdf


Heat Sink (optional) 200 x 80 x 50 mm/7.9 x 3.2 x 2.0 in.
DC Power Supply (optional) 171 x 104 x 55 mm/6.7 x 4.1 x 2.2 in.
Cable Laser Head to Controller 2m/6.56 ft. and options
Weights
Laser Head7 0.35 kg/0.77 lbs.
Controller 0.25 kg/0.55 lbs.
Heat Sink (optional)…

COHR SapphireLPX DS 0519 2.pdf

COHR SapphireLPX DS 0519 2.pdf

…Non-Operating Condition
0 to 95, non-condensing
0 to 100, non-condensing
Dimensions (L x W x H)
Laser Head
Controller
Heat Sink (optional)
DC Power Supply (optional)
Cable -- Laser Head to Controller
125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.)
117.8 x…