Ask a Question
Coherent
Search Results
Refine
1 - 12 of 81 Products for 'Heat Sink With Fan' Page 1 of 7 |

Heat Sink With Fan

OBIS LX/LS Heat Sink

OBIS LX/LS Heat Sink

…performance over time and temperature
* Laser can be mounted on top or side for opposite polarization Datasheet OBIS Heat Sink Drawing OBIS Heat Sink Heat Sink with Fan for Thermal Management - Convenient 69 mm (2.7 inch) beam height Output beam centered on standard table bolt pattern Universal…

EnergyMax Heat Sink Accessories

EnergyMax Heat Sink Accessories

…Use one of these heat sinks when you want to measure your pulsed laser at higher repetition rates or at higher energy levels. The heat sinks are easily installed by threading them onto the back of a sensor housing with a 1/4-20 cap screw conveniently contained within the heat sink. The Small and…

Instrument Accessories

Instrument Accessories

…Accessories Products 1000-1Attentuator Soft carrying cases for FieldMate, FieldMaxII, and LabMax Energy Sensor Damage Test Slides EnergyMax Heat Sink Accessories Fiber Optic Connector Adapters Replacement AC Power Adapters Thermal Smart Sensor Adapter Visit the Support & Download Center…

Energy Max Laser Sensors

Energy Max Laser Sensors

…built into each unit
* Onboard sensors provide automatic temperature compensation
* Modular heat sinks to extend measurement range
* Compact size to enable measurements within instruments
* Molded cable with bend and strain relief protects against rough handling Visit the Support & Download…

Multipurpose EnergyMax Sensors

Multipurpose EnergyMax Sensors


* Modular heat sinks to extend measurement range
* Compact size to enable measurements within instruments
* Molded cable with bend and strain relief protects against rough handling Coherent’s Multipurpose EnergyMax sensors are economical, pulse energy detectors intended for use with a wide range…

CUBE Accessories

CUBE Accessories

…CUBE laser diode module system with accessories including a heat sink with cooling fan, interface cables, and a control box. Contact Us About This Product close PRICE HERE CUBE Laser Diode Module Accessories Optimize your CUBE laser diode module accessories with one of many options. For more…

Genesis-Taipan-Series

Genesis-Taipan-Series

…±3 488 ±3 Output Power (mW) 1000, 2000 2000, 4000 3000, 5000 Spatial Mode Multimode Bandwidth (nm) 100:1 Direct Modulation5 Available Operating Diode Current (A) 1 MHz; actual performance will be limited by the diode-driver (not included). 6 Air cooling available with appropriate heat sink and fans.

Genesis-Taipan-Series

Genesis-Taipan-Series

…532 ±3 Output Power (mW) 3000, 5000 3000, 5000, 8000 10000 Spatial Mode Multimode Bandwidth (nm) 100:1 Direct Modulation5 Available Operating Diode Current (A) 1 MHz; actual performance will be limited by the diode-driver (not included). 6 Air cooling available with appropriate heat sink and fans.

COHR CUBE DS 0316 3.pdf

COHR CUBE DS 0316 3.pdf

CUBE Accessories 1073840 CUBE Heat Sink Accessory CUBE heat sink with fan, 127 x 66 x 44 mm 1079150 CUBE 2nd Emission Lamp CDRH lamp for laser emission. Connects to CUBE I/O cable. 1072166
*CUBE Interface Cable CUBE to control box, I/O, RS-232 and power 1072454
*CUBE Power Supply, 6 VDC, 2.5 amps…

COHR CUBE DS 0316 3.pdf

COHR CUBE DS 0316 3.pdf

CUBE Accessories 1073840 CUBE Heat Sink Accessory CUBE heat sink with fan, 127 x 66 x 44 mm 1079150 CUBE 2nd Emission Lamp CDRH lamp for laser emission. Connects to CUBE I/O cable. 1072166
*CUBE Interface Cable CUBE to control box, I/O, RS-232 and power 1072454
*CUBE Power Supply, 6 VDC, 2.5 amps…

COHR CUBE DS 0316 3.pdf

COHR CUBE DS 0316 3.pdf

CUBE Accessories 1073840 CUBE Heat Sink Accessory CUBE heat sink with fan, 127 x 66 x 44 mm 1079150 CUBE 2nd Emission Lamp CDRH lamp for laser emission. Connects to CUBE I/O cable. 1072166
*CUBE Interface Cable CUBE to control box, I/O, RS-232 and power 1072454
*CUBE Power Supply, 6 VDC, 2.5 amps…

Book.book

Book.book

…setting of 1 N·m (142 oz·in.). 5. If fan operation is required, connect the fan to the CUBE power supply with the cable provided with the heat sink. The fan cable will allow power to be supplied to the heat sink fan and the CUBE simultaneously. 6. Proceed with normal laser operation. Right Angle…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions