Search Results

Refine
1 - 12 of 42 Products for 'Heatsink' Page 1 of 4 |

Heatsink

COHR OBIS HeatSink DS 0517 2.pdf

COHR OBIS HeatSink DS 0517 2.pdf

Heat Sink with Fan for Thermal Management OBIS LX and OBIS LS laser products come with a variety of accessories to support your application needs. As with all OBIS LX and OBIS LS lasers, the laser itself offers a standalone all-in-one laser solution. The OBIS laser comes with a Power Connection, USB…

Excimer Laser EnergyMax Sensors

Excimer Laser EnergyMax Sensors

…when the sensors are used with optional user installable heat sinks. Accessories
* EnergyMax Small heatsink (1123430)
* EnergyMax Medium heatsink (1123431)
* EnergyMax Large heatsink (1123432) Drawing Packages Click the links below to download a complete drawing package for these products.…

OBIS CellX Laser Combiner

OBIS CellX Laser Combiner

…light engine, making it the perfect laser combiner for instrumentation applications. Datasheet OBIS CellX Drawing OBIS CellX Drawing OBIS CellX Heatsinks OBIS CellX is a compact, easy-to-use laser beam combiner featuring: Three to four wavelengths available to combine 405 nm, 488 nm, 561 nm, and 637…

High Rep-Rate EnergyMax Sensors

High Rep-Rate EnergyMax Sensors

…LabMax-Pro SSIM and LabMax-TOP meters. USB and RS232 enabled models are also available. The 25 mm and 50 mm diameter sensors accept an optional heatsink, which can be easily attached by the user to extend energy and/or repetition rate range. Specifically, these heat sinks allow the J-25MT-10KHZ…

Multipurpose EnergyMax Sensors

Multipurpose EnergyMax Sensors

…FieldMax-TOP, and FieldMaxII-P meters. USB and RS232 enabled models are also available. The 25 mm and 50 mm diameter sensors accept an optional heatsink, which can be easily attached by the user to extend energy and/or repetition rate range.Specifically, these heat sinks allow 25 mm sensors to be…

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

…are compatible with Coherent LabMax-TOP, 3sigma, FieldMaxII-TOP, FieldMaxII-P, EPM1000 and EPM2000 meters. Both sensors accept an optional heatsink, which can be easily attached by the user to extend the maximum energy or average power range. Specifically, these heat sinks allow the J-25MB-IR…

HEATSINK 2 IN 10W - Sheet1

HEATSINK 2 IN 10W - Sheet1

2.00 50.80 NO. 8-32 UNC-2A THD SOC HD CAP SCREW 2.00 50.80 .14 3.43

HEATSINK 2 IN 15W - Sheet1

HEATSINK 2 IN 15W - Sheet1

NO. 8-32 UNC-2A THD SOC HD CAP SCREW 3.07 77.98 .14 3.43 2.00 50.80

HEATSINK 3 IN 20W - Sheet1

HEATSINK 3 IN 20W - Sheet1

NO. 8-32 UNC-2A THD SOC HD CAP SCREW 2.880 73.15 .16 4.06 3.00 76.20

EnergyMax HeatSinks DS.qxd

EnergyMax HeatSinks DS.qxd

EnergyMax Heat Sinks Accessories for EnergyMax Sensors Features · Extend EnergyMax energy and/or repetition rate range · Easily attach to EnergyMax sensors in the field · Two heat sinks for 25 mm sensors (small, medium) · One heat sink for 50 mm sensors (large) Superior Reliability & Performance…

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual

…Increasing average power with heatsinks (this page)
· Pyroelectric technology (p. 3-2)
· Damage thresholds (p. 3-3)
· Measurement linearity (p. 3-4)
· Spectral response (p. 3-5)
Increasing
Average Power
With Heatsinks
Using a heatsink increases the average…

Vitara Preinstall.book

Vitara Preinstall.book

…for all
other laser parameters can be found at www.coherent.com.
Figure 2-2. Verdi G-Series Laser Head Optical Schematic.
Heatsink
Pump Diode
Pump Delivery
Optics
OPS Chip
LBO
Optical Cavity
Output
Beam
Output
Coupler

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions