Search Results

1 - 12 of 20 Products for 'High Power Argon' Page 1 of 2 |

High Power Argon

INNOVA 70C Ion Laser

INNOVA 70C Ion Laser

…0.5% 0.5% 1 All powers are listed in Watts. Guaranteed power specifications for standard systems are indicated in bold print. All power specifications, except multiline visible and IR, are TEM00. 2 All beam specifications are measured at specified output powers at 514.5 nm for argon lasers and 47.1…

Ion Lasers

Ion Lasers

…be the right solution for your application:
* Continuous wave radiation at one or more of the available Argon or Krypton transitions which span the spectrum from the UV to the IR
* Relatively high spectral purity
* Multi-watt output at any number of different wavelengths
* Exquisite, circular TEM 00…

INNOVA 90C

INNOVA 90C

…beam specifications are measured at specified output powers at 514.5 nm for argon lasers and 47.1 nm for krypton lasers. 3 Beam diameter is measured at the output-coupler mirror. 4 Inside the resonator, the beam waist is located at the flat high reflector. The long-radius output coupler acts as a…

INNOVA Sabre Laser

INNOVA Sabre Laser

…Single-Line Options, 275.4 nm is specified using a prism wavelength selector. Lower powers are specified using the prism wavelength selector. Argon TSM Innova Sabre Argon System with Tunable Sealed Mirror (TSM) Tubes Power Specifications 1 Wavelength (nm) TSM10 TSM15 TSM20 TSM25 Multiline Visible…

Mira Family

Mira Family

…enabling easy adjustment of the output wavelength, pulse width and power. Mira-HP Mira-HP High-Power Ultrafast Ti:Sapphire Oscillator delivering high power across the entire Ti:Sapphire tuning curve. The Mira-HP combines high reliability and a user-friendly open architecture with the Optima suite…

Life Sciences and Medical Applications

Life Sciences and Medical Applications

…automation, miniaturization, and high speed. Array plates have gotten denser over the year and today can total as many as 1,536 separate wells, so imaging speed is of paramount importance in order to view all these wells at high resolution on a practical timescale. High performance array readers are…

Lasers | Photonics Handbook®

Lasers | Photonics Handbook®

…perform the initial
electrical-to-optical power conversion.
For example, higher-power visible and UV CW applications were originally supported by argon-ion and krypton-ion lasers. Based on a plasma discharge tube
operating at high current, these gas-phase lasers are large and…

Advances in Diode Lasers and OPSLs

Advances in Diode Lasers and OPSLs

power consumption and heat dissipation, reliability and lifetime, and cost of ownership. This whitepaper compares these technologies and shows why the end of these venerable gas lasers is finally at hand. The Pros and Cons of Gas Lasers Ion (argon, krypton) and HeCd lasers generally produce a high

Laser Focus World - August 2016

Laser Focus World - August 2016

…MarketInsights
thus came to dominate flow cytometry
in the 1980s. Over time, however, the
ongoing evolution of highly reliable and
compact air-cooled argon lasers enabled
construction of smaller (though still massive compared with today's offerings) and
less-expensive…

Quotation KML QGYYMMDD G  Institute Contact

Quotation KML QGYYMMDD G Institute Contact

…the spectrum is peaked near 13.5 nm, and the flux after optimization was determined to be
Figure 3. Stability of XUUS4
TM output over 1 hour in the case for
the case of HHG to 35 nm using Argon, as in figure 2. The source
exhibits excellent power and beam pointing stability.

COHR WP OPSL Wavelength Flexibility final 4.17.18.pdf

COHR WP OPSL Wavelength Flexibility final 4.17.18.pdf

…was the argon ion legacy wavelength at 488 nm. However, the human eye is very sensitive
to color differences and a challenge with laser light shows has been to generate a true white,
technically referred to as D65.
Coherent uses OPSL technology to provide multi-watt power at legacy…

00 M5C Pre Install.book

00 M5C Pre Install.book

…for the
M5C LMT system.
Passing a purge gas through the laser head and RF power module can
prevent component damage by creating an internal positive pressure. Also, under some conditions of high humidity, the laser beam
can be distorted by optical absorption of fluid vapor by…