Search Results

25 - 36 of 122 Products for 'Holdings' Page 3 of 11 |
Related Categories: Welding | Export Compliance | Jobs | Midaz | Iso

Holdings

LaserCheck Operating Instructions

LaserCheck Operating Instructions

…ranges.....................................9.99 µW to 999 mW Peak sample time.....................................................................2 sec. Display hold time ....................................................................10 sec. Battery life .................... 180,000…

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…laser power meter
· Wavelength range: 400 nm to 1064 nm
· User-selectable spectral compensation
· Auto-ranging with peak sample and hold
· For CW and >1 MHz lasers
Wavelength (nm)
Power (W)
1.E-06
400
1.E-05
1.E-04
1.E-03
1.E-02
500…

FMII-TO QuickStartGuideRevAD.fm

FMII-TO QuickStartGuideRevAD.fm

…measurement.
q
Unblock the beam, take the measurement, and
observe the result on the display.
Stat
Avg Atten
Area
Hold
Zero
Auto
Software Installation
For complete software installation
instructions, refer to the FieldMaxIITM
Software…

PL-501 Book.book

PL-501 Book.book


your safety, this focusing wrench has been designed to minimize the likelihood of
accidental exposure to the laser beam.
7. While holding the laser in one hand and the wrench in the other, gently press and
rotate the wrench until the teeth align themselves with the slots in the…

18-05-09 a GTC Supply Switzerland.pdf

18-05-09 a GTC Supply Switzerland.pdf


contract shall apply at least as given by statutory
law. In particular, we have the right to withhold
payments due for as long as we hold claims
against the supplier for incomplete or defective
goods or services, regardless of whether due under the same or another contract.…

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual

…protective cap over the sensor.
4. Place the sensor in the original shipping carton and then situate
the foam cutout over the sensor to hold it in place during shipment.
If the original packing material and shipping carton are not
available, obtain a corrugated cardboard shipping…

00 E-250 Pre.book

00 E-250 Pre.book

Utility Requirements and System Installation
3 - 21
Option One:
Forklift Method
1. Cut and remove any/all banding that holds the box(es) to the
skid (Figure 3-5).
If the laser system is significantly below room temperature, it is
recommended that the laser system…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

Utility Requirements and System Installation
3 - 21
Option One:
Forklift Method
1. Cut and remove any/all banding that holds the box(es) to the
skid (Figure 3-6).
If the laser system is significantly below room temperature, it is
recommended that the laser system…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

Utility Requirements and System Installation
3 - 21
Option One:
Forklift Method
1. Cut and remove any/all banding that holds the box(es) to the
skid (Figure 3-6).
If the laser system is significantly below room temperature, it is
recommended that the laser system…

Coherent BioRay Operator's Manual

Coherent BioRay Operator's Manual

Converting a BioRay Laser to FC
B - 3
4. Loosen the collimating lens setscrew on the laser.
5. Make sure the four screws holding the SMA mount to the
dovetail are lightly seated (minimal pressure applied)--the
SMA mount needs to be able to move relative to the dovetail

COHR WhitePaper High Repetition Rate USP Lasers Improve OLED Cutting Results.pdf

COHR WhitePaper High Repetition Rate USP Lasers Improve OLED Cutting Results.pdf

…ultra-short pulse (USP) lasers with very high peak power. This high peak
power is sufficient to directly break the molecular or atomic bonds which hold the material
together, rather than simply heating it, resulting in inherently "cold" material removal. Plus, the
material is exposed…

Microsoft Word - Coherent Whitepaper - Laser Processing of µLED

Microsoft Word - Coherent Whitepaper - Laser Processing of µLED

…displays comprised of micro-LEDs (LED) are stepping up to this challenge. Micro-LEDs based on inorganic III-V semiconductors (such as GaN) hold great promise for displays that outperform existing technology in terms of efficiency, brightness, pixel density, lifetime and operating range.…