Search Results

37 - 48 of 122 Products for 'Holdings' Page 4 of 11 |
Related Categories: Welding | Export Compliance | Jobs | Midaz | Iso

Holdings

Microsoft Word - LMT Lens Optics Cleaning Procedure COHR.docx

Microsoft Word - LMT Lens Optics Cleaning Procedure COHR.docx

…efficiently and system performance will degrade. These optic windows are $135.00 each. You should always
handle the optic window with gloves and hold it by the edges. Inspect the window visually at this point to
determine how dirty the lens actually is. See Figure 8.
Figure 8. Optic…

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

Utility Requirements and System Installation
3 - 21
Option One:
Forklift Method
1. Cut and remove any/all banding that holds the box(es) to the
skid (Figure 3-6).
If the laser system is significantly below room temperature, it is
recommended that the laser system…

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Utility Requirements and System Installation
3 - 21
Option One:
Forklift Method
1. Cut and remove any/all banding that holds the box(es) to the
skid (Figure 3-6).
If the laser system is significantly below room temperature, it is
recommended that the laser system…

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-3-5 Series OEM Lasers Preinstallation Manual
3 - 22
Option One:
Forklift Method
1. Cut and remove any/all banding that holds the box(es) to the
skid (Figure 3-5).
NOTICE!
If the laser system is significantly below room temperature, it is
recommended…

FieldMaxII Family DS

FieldMaxII Family DS

…Enter attenuation factor and engage attenuation
AREA J/cm2 (fluence) W/cm2 (power density) J/cm2 (fluence)
W/cm2 (power density)
HOLD - Holds displayed values on screen -
TRIG Select trigger level with energy sensors - Select trigger level with energy sensors
SETUP/LOCAL Set…

Compact Single Mode Tunable Laser Using a Digital Micromirror Device.pdf

Compact Single Mode Tunable Laser Using a Digital Micromirror Device.pdf

…second hold and 50 ms switch cycles
0 50 100 150
776.74
776.75
776.76 Channel 1
time [min]
780.08
780.09
780.10
780.11
Channel 2
Wavelength [nm]
783.48
783.49
783.50
0 750 1500 2250
Channel 3
number of 4 second hold

D-ADM-AVT-00166-OS 01 Standard Terms and Conditions STC

…av påstått intrång i
immateriella rättigheter enligt vad som anges
under stycke (1).
(2) The supplier shall indemnify and hold Optoskand
harmless against any and all claims asserted
against Optoskand by third parties for the alleged
infringement of intellectual…

Code of Business Conduct.pdf

Code of Business Conduct.pdf


Coherent Intranet.
3.2 Proprietary Information, including Intellectual Property
and Confidential Information: Covered Persons should hold in
confidence and not directly or indirectly use or disclose, either
during or after termination of employment with Coherent, any

CMM 10.4.indd

CMM 10.4.indd

…pulse (USP)
lasers with very high peak powers. This power is
sufficient to directly break the molecular or atomic
bonds which hold the material together, rather
than simply heating it, resulting in inherently
"cold" material removal. Plus, the material is
exposed…

CMM 8.2.indd

CMM 8.2.indd

…then explodes away because of Coloumb
repulsion. Since photo ablation involves
directly breaking the molecular or atomic
bonds, which hold the material together, rather
than simply heating it, it is intrinsically not a
hot process. Also, when using ultrafast pulses,
the…

ModeMaster PC User Manual

ModeMaster PC User Manual

…µm and 500 µm are
available for selection.
Status Bar
Status bar tool tips provide additional information on Status Bar
items. Hold the mouse cursor over the Status Bar item and the
tool tip will appear.
Ready/File Name - Indicates the current software status. Ready…

Microsoft Word - kW Thermopile Damage Threshold.doc

Microsoft Word - kW Thermopile Damage Threshold.doc

…instantly exposing the absorber to 5 kW. The absorber can be damaged if it is
instantly exposed to a beam near its damage threshold limit. Hold each 1 kW increment for
approximately 5 seconds to allow time for the temperature to stabilize.
Watch for Signs of Damage
As the power…