Ask a Question
Coherent

Search Results

1 - 12 of 664 Products for 'Humidity' Page 1 of 56 |

Humidity

Picosecond laser

Picosecond laser

…Too high humidity Fault 72 HEAD_HUMIDITY_2_VERY_HIGH_FAULT FAULT H2 Too high humidity Fault 73 HEAD_HUMIDITY_3_VERY_HIGH_FAULT FAULT H3 Too high humidity Fault 74 HUMIDITY1_INITIALIZATION_FAULT FAULT Humidity sensor 1 initialization fault 75 HUMIDITY2_INITIALIZATION_FAULT FAULT Humidity sensor 2…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…that leads to condensation is warm, humid weather combined with fluid that is cooler than the surroundings. High risk conditions which are likely to lead to condensation are: · Operating the laser in a room that is not air conditioned in high humidity environments · Using cooling fluid that…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…information provides recommendations for operating conditions outside of the normal temperature and humidity range. The conditions that lead to a situation where there can be condensation are warm and humid weather combined with water that is cooler than the surroundings. High risk conditions which…

Verdi preinstall.book

Verdi preinstall.book

Verdi V-8/V-10 Laser Preinstallation Manual 9 Dimensions Table 1-2. Environmental Requirements PARAMETER REQUIREMENT Operating temperature 15 to 35°C (59 to 95°F) Relative humidity 5 to 95% (non condensing) Altitude Sea level to 10,000 feet Figure 1-7. Laser Head Dimensions

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…information provides recommendations for operating conditions outside of the normal temperature and humidity range. The conditions that lead to a situation where there can be condensation are warm and humid weather combined with water that is cooler than the surroundings. High risk conditions which…

Mira 900

Mira 900

…easy adjustment of the output wavelength, pulse width and power. Optima features a fast photodiode, relative power monitor, ß-lock, CW detector, humidity sensor and an automatic starter. A wide range of accessories is available for the Mira-900. These allow operation at lower repetition-rate (Pulse…

LDP-100MQ

LDP-100MQ

…1/m @ 15 C max. temp. Optional city-water cooled refrigerated chiller requires city water, 8 1/m @ 25 C max. temp Temperature Operating 18 - 33 C Humidity 10 - 90%, non-condensing
* Actual dimensions and water service are configuration dependent HIGH POWER, DIODE-PUMPED CW Nd:YAG LASER - Multimode /…

LDP-100TQ

LDP-100TQ

…1/m @ 15 C max. temp. Optional city-water cooled refrigerated chiller requires city water, 8 1/m @ 25 C max. temp Temperature Operating 18 – 33 C Humidity 10 - 90%, non-condensing
* Actual dimensions and water service are configuration dependent DIODE-PUMPED Nd:YAG LASER - TEMoo Mode Efficient diode…

LDP-100MQG

LDP-100MQG

…15° C max. temp. Optional city-water cooled refrigerated chiller requires city water, 8 1/m @ 25 C max. temp Temperature Operating 18 – 30° C Humidity 10 - 90%, non-condensing
* Actual dimensions and water service are configuration dependent DIODE-PUMPED Nd:YAG LASER - Multimode / 532 nm Wavelength…

LDP-100TQG-DP

LDP-100TQG-DP

…@ 15 C max. temp. Optional city-water cooled refrigerated chiller requires city water, 8 1/m @ 25 C max. temp Temperature Operating 18 – 30 C Humidity 10 - 90%, non-condensing
* Actual dimensions and water service are configuration dependent DIODE-PUMPED Nd:YAG LASER - TEMoo Mode / 532 nm Wavelength…

FLARE NX

FLARE NX

…Temperature (°C) 15 to 45°C (59 to 113°F) Ambient Storage Temperature (°C) -20 to +50°C (-4 to 122°F) Laser Head Heat Dissipation 2 (W) =40 Relative Humidity (%)(non-condensing) <80 Laser Head Dimensions (W x H x L) 93.5 x 38.25 x 160 mm (3.68 x 1.5 x 6.3 in) Laser Head Weight ~1.25 kg (2.75 lbs.)…

RAPID FX

RAPID FX

…- Chiller +15 to 30°C (59 to 86°F) Vibration <0.15 g Temperature -10 to +50°C (-14 to 122°F) Temperature Gradient 15°C (59°F) per hour Relative Humidity 5% to 90% Shock 5 g in 30 ms High Energy Industrial fs-Laser for Micromachining - As part of Coherent’s industrial ultrafast laser lineup, the…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions