Search Results

1 - 12 of 12 Products for 'Hyper Rapid 100' Page 1 of 1 |
  • 1

Hyper Rapid 100

Picosecond Lasers

Picosecond Lasers

…Helios lasers allow for better precision in a variety of micromachining and microelectronics applications. HYPER RAPID HYPER RAPID This family of picosecond lasers consists of a 50 W and 100 W models offered at 1064 nm and 1000 kHz for high throughput applications in ps-laser micromachining.…

Picosecond laser

Picosecond laser

…AOM
Hyper Rapid 50 50 W 125 µJ 400-1000 IR, SHG,
THG
AOM
Hyper Rapid 50-HE
(high energy)
50 W 200 µJ 200-500 specified;
up to 1000
IR, SHG,
THG
AOM
Hyper Rapid 75 75 W 150 µJ 400-1000 IR, SHG,
THG
AOM
Hyper Rapid 100 100 W 250 µJ…

HYPER RAPID Lasers

HYPER RAPID Lasers

…applications that weren’t previously economically feasible are now possible. Datasheet Hyper Rapid 100 Datasheet Hyper Rapid 50 Datasheet Hyper Rapid 100 355-SW Drawing HR 50 Mechanical Drawing Drawing HR 100 Mechanical Drawing Applications Application Process Material Glass Cutting & Drilling…

compatibility matrix 02

compatibility matrix 02

…PM30X
Flare 355, 532, 1064 nm LabMax-TOP J-10MB-HE
Helios 532, 1064 nm FieldMaxII-TO PM10
HYPER RAPID 25 355, 532, 1064 nm FieldMaxII-TO PM30
HYPER RAPID 50 355, 532, 1064 nm FieldMaxII-TO PM150
Indigo-DUV (discontinued 2010) 193 nm FieldMaxII-TO PS10 LabMax-TOP…

HYPERRAPID100 DS 0414 5.pdf

HYPERRAPID100 DS 0414 5.pdf

100 The HYPER RAPID 100 is a powerful industrial ps-laser offering pulse-on-demand and burst mode operation at output powers up to 100W for high quality micromachining at high throughput.With this laser, the total cost per watt ratio for ps-laser pulses is significantly reduced. The HYPER RAPID 100

HyperRapid NX/NXT - Industrial Picosecond Laser

HyperRapid NX/NXT - Industrial Picosecond Laser

…picosecond laser series is designed and manufactured for 24/7 operation in a variety of environmental conditions. High average power operation at >100 W across a wide range of repetition rates up to 4 MHz, allows for high throughput micro-machining with the highest quality and no heat affected zone.…

Ultrashort Pulse Lasers | Coherent

Ultrashort Pulse Lasers | Coherent

…Helios lasers allow for better precision in a variety of micromachining and microelectronics applications. HYPER RAPID HYPER RAPID This family of picosecond lasers consists of a 50 W and 100 W models offered at 1064 nm and 1000 kHz for high throughput applications in ps-laser micromachining.…

Industrial Picosecond

Industrial Picosecond

…applications. Output powers range from 2W to 100W and wavelength options are available from 355 nm to 1064 nm. Contact Us About This Product Close All Industrial Picosecond Products HYPER RAPID HYPER RAPID This family of picosecond lasers consists of a 50 W and 100 W models offered at 1064 nm and…

250 kHz Ultrafast Amplifiers

250 kHz Ultrafast Amplifiers

…array diode lasers are available in two-bar through five-bar configurations for side-pumping applications. HYPER RAPID HYPER RAPID This family of picosecond lasers consists of a 50 W and 100 W models offered at 1064 nm and 1000 kHz for high throughput applications in ps-laser micromachining.…

Materials Processing & Industrial Applications

Materials Processing & Industrial Applications

…processes enable the trend towards thinner glass and advanced material mixes. Related Products DIAMOND E-Series Monaco MATRIX QS DPSS Lasers HYPER RAPID ExactCut 430 Laser Cutting System Laser Glass Engraving Coherent lasers are the ideal source for microstructuring inside glass. When marking and…

Microelectronics

Microelectronics

…and pulsed (visible and UV) Ion lasers CO2 lasers Semiconductor diode lasers (IR, visible, violet) Measurement Instruments Related Products HYPER RAPID HyperRapid NX Monaco Excimer Lasers & UV Beam Delivery Ion Lasers Sapphire Lasers Reel-to-Reel Direct Patterning of Flex Circuits Like virtually…

COHR HyperRapid50 DS 0716 4.pdf

COHR HyperRapid50 DS 0716 4.pdf


Shipping Specifications
Temperature +5°C to +50°C (41°F to 122°F)
Relative Humidity 10 to 90%, non-condensing
1 Specified at default repetition rate = 500 kHz for Hyper Rapid 50 and 250 kHz for Hyper Rapid 50 HE.
2 Transformer can be provided for 110V or 208V operation.

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions