Ask a Question
Coherent

Search Results

1 - 12 of 58 Products for 'Hyper Rapid 50' Page 1 of 5 |

Hyper Rapid 50

HYPER RAPID

HYPER RAPID

…previous system, applications that weren’t previously economically feasible are now possible. Datasheet Hyper Rapid 100 Datasheet Hyper Rapid 50 Datasheet Hyper Rapid 100 355-SW Drawing HR 50 Mechanical Drawing Drawing HR 100 Mechanical Drawing Applications Application Process Material Glass Cutting…

HyperRapid NX - Industrial Picosecond Laser

HyperRapid NX - Industrial Picosecond Laser

…NX delivers up to 250 µJ pulse energy with typically 10 ps duration at repetition rates up to 1 MHz.
* Output powers are up to 100 W in the IR, 50 W in the visible and 30 W in the UV. These performances allow to simultaneously feed 2 workstations within one machine, further reducing the TCO…

Picosecond laser

Picosecond laser

…name Device name Voltage Power consumption (average) Rapid power supply P60 100-230V 700 W Hyper Rapid 25 power supply P90 230V
* 1100 W Hyper Rapid 50 power supply P90 230V
* 1300 W Hyper Rapid 75 power supply P90 230V
* 1500 W Hyper Rapid 100 power supply P90 230V
* 1600 W External EOM (optional…

Microelectronics

Microelectronics

…CW and pulsed (visible and UV) Ion lasers CO2 lasers Semiconductor diode lasers (IR, visible, violet) Measurement Instruments Related Products HYPER RAPID Related Product Families Excimer Lasers & UV Beam Delivery Reel-to-Reel Direct Patterning of Flex Circuits Like virtually every other branch…

Picosecond laser

Picosecond laser

RAPID, HYPER RAPID 16 of 31 Laser head Dimensions (W x D x H) Weight Image Rapid, Rapid 10 526 x 1017 x 167 mm (20.7 x 40 x 6.6 inches) 70 kg / 154 lbs Rapid, Rapid 10 with freq.-conversion (and/or external EOM) 526 x 1296 x 195 mm (20.7 x 51 x 7.7 inches) 89 kg / 196 lbs Hyper Rapid 25, 50 IR-only,…

HYPERRAPID100 DS 0414 5.pdf

HYPERRAPID100 DS 0414 5.pdf

…Industrial ps-Laser HYPER RAPID 100 System Specifications HYPER RAPID 100 Wavelength (nm) 1064 (532 and 355 optional) Pulse Repetition Rate (kHz) 400 to 1000 Spatial Mode TEM00 (M2 >100:1 Beam Divergence, Full Angle (mrad) 85 Beam-Pointing Stability in Full PRF Range (rad/°C) <50 Electric Supply1…

Picosecond laser

Picosecond laser

RAPID, HYPER RAPID 22 of 31 Connecters Hyper Rapid The connecters for the Hyper Rapid are located on the rear side of the power supply P90: Figure 5: Power supply P90, rear side 1 CPC connecter water in from laser head 2 Laser diodes with fiber coupler 3 Mains power cable (230 VAC, 50-60 Hz) 4 no…

Picosecond laser

Picosecond laser

…range: 100-500 or 400-1000 IR, SHG, THG not required, function is integrated Hyper Rapid 25 25 W 125 µJ 200-1000 IR, SHG, THG EOM Hyper Rapid 50 50 W 125 µJ 400-1000 IR, SHG, THG EOM Hyper Rapid 50-HE (high energy) 40 W @ 200 kHz 200 µJ 200-1000 IR, SHG, THG EOM 5 of 31 RAPID, HYPER RAPID

Picosecond laser

Picosecond laser

…power supply units. Supply unit Dimension (W x D x H) Weight Height Power supply P90 for Hyper Rapid 25, 50, 75, 100 485 x 555 x 400 mm 19 x 21.9 x 15.8 inches 55 kg / 121 lbs 9 U Chiller P320 for Hyper Rapid 25, 50, 75, 100 485 x 600 x 400 mm 19 x 23.6 x 15.8 inches 65 kg / 143 lbs 9 U External AOM…

Picosecond laser

Picosecond laser

RAPID, HYPER RAPID 20 of 31 Figure 3: Schematical design of the laser system optional freq.-conversion, software-switchable Connecters Rapid The connecters for the Rapid, Rapid 10 are located on the rear side of the power supply P60: Figure 4: Power supply P60, rear side 1 CPC connecter water in…

COHR HyperRapid50 DS 0716 4.pdf

COHR HyperRapid50 DS 0716 4.pdf

…beams The HYPER RAPID 50 is a powerful industrial ps-laser offering pulse-on-demand and burst mode operation at output powers up to 50W for high quality micromachining at high throughput.With this laser, the total cost per watt ratio for ps-laser pulses is significantly reduced. The HYPER RAPID 50

COHR HyperRapid50 DS 0716 4.pdf

COHR HyperRapid50 DS 0716 4.pdf

…Humidity <60%, non-condensing Shipping Specifications Temperature +5°C to +50°C (41°F to 122°F) Relative Humidity 10 to 90%, non-condensing 1 Specified at default repetition rate = 500 kHz for Hyper Rapid 50 and 250 kHz for Hyper Rapid 50 HE. 2 Transformer can be provided for 110V or 208V operation.

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions