Search Results

1 - 12 of 13 Products for 'Hyperrapid Uv Laser' Page 1 of 2 |

Hyperrapid Uv Laser

COHR HRNX 355-30 HRR DS 0918 5.pdf

COHR HRNX 355-30 HRR DS 0918 5.pdf

HyperRapid NX 355-30 HRR UV Picosecond Lasers for High-End Electronics Manufacturing HyperRapid NX 355-30 HRR is the industry standard for 30 W UV output power with a pulse repetition rate of up to 2 MHz. Processing at high repetition rates (above 1 MHz) provides a multi-fold increase in throughput…

HyperRapid NX/NXT - Industrial Picosecond Laser

HyperRapid NX/NXT - Industrial Picosecond Laser

…in the extensive industrial short pulse lasers portfolio. HyperRapid NX delivers up to 250 µJ pulse energy with typically 10 ps duration at repetition rates up to 1 MHz.
* Output powers are up to 100 W in the IR, 50 W in the visible and 30 W in the UV. These performances allow to simultaneously…

Ultrashort Pulse Lasers | Coherent

Ultrashort Pulse Lasers | Coherent

…RAPID This family of picosecond lasers consists of a 50 W and 100 W models offered at 1064 nm and 1000 kHz for high throughput applications in ps-laser micromachining. HyperRapid NX and NXT Series HyperRapid NX and NXT Series This industrial picosecond laser features high average power operation…

Microelectronics

Microelectronics

…Solid-state lasers, CW and pulsed (visible and UV) Ion lasers CO2 lasers Semiconductor diode lasers (IR, visible, violet) Measurement Instruments Related Products HYPER RAPID HyperRapid NX Monaco Femtosecond Laser | Coherent Excimer Lasers & UV Beam Delivery Ion Lasers Sapphire Lasers

Materials Processing & Industrial Applications

Materials Processing & Industrial Applications

…from a HyperRapid ps Laser. If operated at a high rep rate, good cutting quality can be achieved using a multiple pass cutting method. Related Products HighLight FL-1000P HYPER RAPID AVIA NX Monaco Femtosecond Laser | Coherent HighLight FL-Series CO and CO₂ Lasers Laser Cutting Systems Laser

USP Lasers Semiconductor Packaging Whitepaper.pdf

USP Lasers Semiconductor Packaging Whitepaper.pdf

…also produces greater debris formation.
The Coherent HyperRapid NX (figure 3) is a picosecond USP laser available with 50W of output in
the green (532 nm). This delivers the same cutting speed as the 40W UV nanosecond laser on thick
(1.2 mm) SiP devices - typically a value of around…

Whitepaper - USP Lasers Deliver Cleaner Cuts for Semiconductor Packaging.pdf

Whitepaper - USP Lasers Deliver Cleaner Cuts for Semiconductor Packaging.pdf

…also produces greater debris formation.
The Coherent HyperRapid NX (figure 3) is a picosecond USP laser available with 50W of output in
the green (532 nm). This delivers the same cutting speed as the 40W UV nanosecond laser on thick
(1.2 mm) SiP devices - typically a value of around…

COHR WhitePaper High Repetition Rate USP Lasers Improve OLED Cutting Results.pdf

COHR WhitePaper High Repetition Rate USP Lasers Improve OLED Cutting Results.pdf

…required level of accuracy for this application (see figure 2).
UV Benefits
USP lasers are commercially available with emission wavelengths in the near infrared, green and
UV. In the case of OLEDs, operation in the UV is particularly advantageous because virtually all
of the…

COHR HyperRapidNX DS 0618 1.pdf

COHR HyperRapidNX DS 0618 1.pdf

…CHARTS
TYPICAL MANUFACTURING DATA FOR HyperRapid NX 355-30 (30 W UV)
HyperRapid NX is able to deliver cutting-edge performance in volume. Manufacturing data shows the excellent performance and reliable
consistency across a large number of laser systems.
Beam Quality: M2 and Beam…

Microsoft Word - NovusLight 2018-07 Microelectronics Packaging

Microsoft Word - NovusLight 2018-07 Microelectronics Packaging

…process speed cannot be easily increased simply by applying more laser power.
As a result, 532 nm (green) ultra-short pulse (USP) lasers such as the Coherent HyperRapid NX
picosecond laser and Monaco femtosecond laser can be an alternative when the cut quality is of
utmost importance.…

Untitled-2

Untitled-2

…produces
greater debris formation.
The Coherent HyperRapid NX (figure 3) is a picosecond
USP laser available with 50W of output in the green
(532 nm). This delivers the same cutting speed as the
40W UV nanosecond laser on thick (1.2 mm) SiP devices -
typically a value…

CMM 10.4.indd

CMM 10.4.indd

…manufacturing international Vol 10 No. 4 19
LASERS | ARTICLE
Optimising Process Parameters
USP lasers are commercially available with
spectral output in the near infrared, green and
UV. In the case of OLEDs, operation in the UV is
particularly advantageous because…