Search Results

Refine

Result Type

1 - 8 of 8 Products for 'Infinity' Page 1 of 1 |
  • 1

Infinity

Microsoft Word - Understanding Laser Beam Parameters Leads to Better System Performance and Can Save Money Final.doc

Microsoft Word - Understanding Laser Beam Parameters Leads to Better System Performance and Can Save Money Final.doc

…of the beam diameter is not trivial. The boundary of arbitrary optical beams is not clearly defined and, in theory at least, extends to infinity. Consequently, the dimensions of laser beams cannot be defined and measured as easily as the dimensions of hard physical objects. A good example…

ModeMaster PC User Manual

ModeMaster PC User Manual

…with r = x
- <x> and E(x - <x>) = E(r), the fact that the integration stops at the
profile limits instead of extending to infinity being handled by the
fact that for a centered profile, the intensity should fall to zero (and
remain zero) at the extremes.
This…

Refractive Surgery with Excimers EU OuP.pdf

Refractive Surgery with Excimers EU OuP.pdf

…cause other
side effects such as reduced contrast
sensitivity and stereoacuity.
One solution is to correct the dominant eye for infinity whereas the
non-dominant eye is corrected to be
as much as two times less myopic than
traditional LASIK. More importantly,
the…

Book.book

Book.book


RCA plug
Table 3-6. Interlock Specifications
SYSTEM SPECIFICATIONS VALUE
Interlock Control Input
Maximum Bandwidth
Rise and Fall Time (10% to 90%)
Modulation Depth
Input Impedance
7 Hz
< 1 µsec
Infinity, Complete On/Off
7000 ohms

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

…2^32 -1 can be selected. In Snapshot mode, the maximum number of
requested samples can be 240,000. A value of zero is equivalent to
infinity. This command is ignored if data streaming transmission has
already started.
Command: STARt <optional number of requested samples>…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

…pulse width of
the laser used to generate the power signal.)
The power curve (shown below) is integrated from the pulse start to
infinity. The final energy value is algorithmically calculated shortly
after peak power is attained.
The trigger is not determined by the power…

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual


the laser used to generate the power signal.)
The power curve--refer to Figure 5-1, below--is integrated from
the pulse start to infinity. The final energy value is algorithmically
calculated shortly after peak power is attained.
There is no energy range in long-pulse Joules…

Microsoft Word - Understand Different Laser Beam  Rev 1 Final.doc

Microsoft Word - Understand Different Laser Beam Rev 1 Final.doc

…comparison.
In Depth: Laser Beam Size
The boundaries of optical beams are not
clearly defined and, in theory at least, extend
to infinity. Consequently, the dimensions of
laser beams cannot be defined as easily as the
dimensions of hard physical objects. A good