Search Results

13 - 24 of 103 Products for 'Infrared Pulsed Laser' Page 2 of 9 |
Related Categories: Cube | Infrared | Cube Labview | 10w 1064 Laser | Dpss 1064

Infrared Pulsed Laser

Avia LX Q-switched Laser

Avia LX Q-switched Laser

--> Avia LX Q-switched laser for industrial laser applications This nanosecond DPSS Q-switched UV laser offers high-pulse energy, unmatched reliability, and the right price The AVIA LX industrial laser delivers high pulse energy output in the UV to enable faster, more efficient, and higher quality…

OPA 9800/9850

OPA 9800/9850

…optical parametric amplifiers extend the wavelength coverage of the RegA 9050 high repetition-rate regenerative amplifiers into the visible and infrared spectral ranges. Contact Us About This Product Close PRICE HERE Optical Parametric Amplifiers for RegA 9000/9050 Regenerative Amplifier Accessory…

PowerMax-Pro Sensor

PowerMax-Pro Sensor

…for laser power measurement (50 mW to 15 kW) utilizes a unique thermal flow design enabling fast, high power measurement, with high damage resistance. The sensor is so fast, less than ten microseconds in the case of the “HD” version, that users can trace the pulse shape of modulated lasers at pulse

Sub-Systems for Cutting

Sub-Systems for Cutting

…design, e.g. vehicle dashboards, luxury consumer products and microelectronics. PowerLine F Series Marking Laser PowerLine F Series Marking Laser The completely air-cooled infrared fiber lasers from the PowerLine F series are particularly suitable for small, clearly legible marks and are equally…

Sub-Systems for Marking/Engraving

Sub-Systems for Marking/Engraving

Laser PowerLine F Series Marking Laser The completely air-cooled infrared fiber lasers from the PowerLine F series are particularly suitable for small, clearly legible marks and are equally suited for the processing of plastics and metals at low operation costs. PowerLine Pico Series Marking Laser

Sub-Systems for Surface Structuring/Ablating/Peening

Sub-Systems for Surface Structuring/Ablating/Peening

Laser PowerLine F Series Marking Laser The completely air-cooled infrared fiber lasers from the PowerLine F series are particularly suitable for small, clearly legible marks and are equally suited for the processing of plastics and metals at low operation costs. PowerLine Pico Series Marking Laser

EnergyMax-USB Sensors

EnergyMax-USB Sensors

…measurement of the energy per pulse or average power of pulsed lasers from the nanojoule to the multi-joule level, over wavelengths from the deep ultraviolet through the far infrared, and from single pulses to repetition rates of 10 kHz (with measurements of every pulse). Additionally, stacking (of…

Picosecond laser

Picosecond laser

…parameters for the Hyper
Rapid systems. For more information refer to www.-
coherent.com. The optical wavelength of the laser output is
1064 nm (IR, infrared). An additional frequency conversion to
532 nm (SHG, green) and 355 nm (THG, UV) is optionally
possible. The output…

SST 2017-09 Laser Marking.pdf

SST 2017-09 Laser Marking.pdf

…refertolaserswithcrystal
resonators).
DPSS lasers also emit
in the near infrared.
Generally, these lasers
are more expensive than
a fiber laser of the same
output power level. So,
infrared DPSS lasers are
most commonly used
in applications having…

Laser Focus World - February 2018

Laser Focus World - February 2018


Picosecond laser marking
With picosecond lasers, the pulse duration
is typically shorter than the time for heat to
flow out of the laser interaction zone, even
in metals, so peripheral thermal effects
are greatly reduced compared to nanosecond lasers. This means that a…

Laser Focus World - August 2016

Laser Focus World - August 2016

laser rapidly emerged as an
ideal source for this application because
it can produce blind vias using a simple,
three-pulse process. The first pulse drills
through the overlying copper, which has
a black oxide coating on it to make it absorb infrared (IR). The second pulse

Laser Focus World - May 2015

Laser Focus World - May 2015


results in attosecond light pulses.
The Astrella amplifier is used, for example, in 2D infrared (IR) spectroscopy.
"Conventional infrared absorption spectra are usually obtained from a Fouriertransform infrared (FTIR) instrument,"
says Henrich.…