Search Results

37 - 48 of 97 Products for 'Infrared Pulsed Laser' Page 4 of 9 |

Infrared Pulsed Laser

Refractive Surgery with Excimers EU OuP.pdf

Refractive Surgery with Excimers EU OuP.pdf

…energy serves to remove material by directly breaking the molecular bonds rather than by intense heating as with an infrared laser. Together with the short (a few nanoseconds) pulse duration, these factors enable precision micro-ablation of tissue with almost no peripheral thermal effects. Today,…

IndPhotonics Micromachining Glass Cutting.pdf

IndPhotonics Micromachining Glass Cutting.pdf

…by which a laser can precision drill, scribe, cut or mark a material. Many traditional applications rely on infrared and visible Qswitched lasers, which have pulse widths in the tens of nanoseconds range, and which remove material via a photothermal interaction. Here, the focused laser beam For…

Bio Photonics - February/March 2018

Bio Photonics - February/March 2018

…an
infrared laser. Together with the short (a
few nanoseconds) pulse duration, these
factors enable precision micro-ablation of
tissue with almost no peripheral thermal
effects.
In the U.S., where elective procedures
are more common than in other countries, laser

Coherent-new-lasers-improve-glass-cutting-methods wp.pdf

Coherent-new-lasers-improve-glass-cutting-methods wp.pdf

…a Coherent Monaco femtosecond laser with 40 watts of average power and a pulse width ~350 fs. The surface
roughness was < 350 nanometers, as measured with an AFM.
The Coherent Monaco is an example of this new generation of industrial femtosecond lasers
which already offer average…

PowerMax-Pro-Data-Sheet FORMFIRST.pdf

PowerMax-Pro-Data-Sheet FORMFIRST.pdf

…near infrared and far infrared, including CO2 lasers at 10.6 µm. 50 mW to 150W PowerMax-Pro Features: · Measures power in tens of microseconds · High power up to 150W · Supports lasers from UV to Far-IR wavelengths · Capable of tracing the individual pulse shape of modulated and long pulse lasers ·…

COHR PowerMax-Pro DS 0917 3.pdf

COHR PowerMax-Pro DS 0917 3.pdf

infrared and far infrared, including CO2 lasers at 10.6 µm. FEATURES · Measures power in tens of microseconds · High power up to 150W for HD models and 200W for BB models · Supports lasers from Visible to Far-IR wavelengths · Capable of tracing the individual pulse shape of modulated and long pulse

Microsoft Word - Coherent Whitepaper-Raman and bacteria 4-2019

Microsoft Word - Coherent Whitepaper-Raman and bacteria 4-2019

lasers are naturally monochromatic. And secondly, lasers provide the high intensity required for the weak Raman effect: typically < 10-6 of incident photons are Raman shifted. Most commonly, Raman involves red (Stokes) shifts of the incident light, but anti-Stokes Raman can be combined with pulsed

Mira brochure

Mira brochure

…ultrafast pulses.
Wavelengths from the ultraviolet to infrared
regions are readily accessible.
Detection.
A full range of power meters, autocorrelators,
spectrometers, IR/UV viewers, and more are
available from Coherent for use with Mira
ultrafast laser systems.…

PowerMax-Pro-White-Paper-Novel-Laser-Power-Sensor-Improves-Process-Control FORMFIRST.pdf

PowerMax-Pro-White-Paper-Novel-Laser-Power-Sensor-Improves-Process-Control FORMFIRST.pdf

…that work in the visible, near
infrared or far infrared regions. Together, these
characteristics make photodiodes most useful for low
power measurements of CW lasers, as well as pulse
shape characterization of nanosecond pulsed lasers.
PowerMax-Pro Technology
Coherent…

COHR PowerMax-Pro 15mm DS 0619 6.pdf

COHR PowerMax-Pro 15mm DS 0619 6.pdf

…response speed of small infrared detectors. The microsecond response time enables nearly instant power measurement without any overshoot, and can provide pulse energy, peak power, and rise/fall time with modulated sources. These detectors are designed for integration into laser systems for real-time…

SurfaceCatalystStructure AstrellaProfXiong2D Case Study FINAL.pdf

SurfaceCatalystStructure AstrellaProfXiong2D Case Study FINAL.pdf

…such a technique6. Here, two intense laser beams (a visible and an
infrared one) are focused on the interface. If the target is non-centrosymmetric, a weak visible
wavelength beam at the sum of the two laser frequencies is generated. When the infrared laser
wavelength is resonant with…

COHR case study LIDAR Zugspitze Mountain 1218.pdf

COHR case study LIDAR Zugspitze Mountain 1218.pdf

…Ti:sapphire laser system with a pulse energy up to 250 mJ and a
Newtonian telescope with 0.65 m diameter. Due to these specifications, the maximum range of their
DIAL system is about 12 km.
Raman lidar is an established technique that involves projecting a pulsed laser into the…