Search Results

1 - 12 of 76 Products for 'Interfacing Manual' Page 1 of 7 |

Interfacing Manual

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual
6 - 4
SCPI Interface
Section
Syntax and
Notation
Conventions
Unless otherwise specified, all SCPI commands and queries follow
the syntax and notation conventions specified by the SCPI Standard.
For more information, refer to…

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual
4 - 2
Using the RS-232
Interface
Data Flow Control No software or hardware flow control methods for serial communication is used.
Baud Rate and Other
Communication
Settings
The host must use a fixed baud rate setting of 115200,…

ModeMaster PC User Manual

ModeMaster PC User Manual

ModeMaster PC User Manual
2 - 2
Live/Alignment
Window
The ModeMaster PC interface is designed to provide a multi-dimensional view of all available analysis functions and controls within a
single easy-to-read window. The functions, controls, and readouts
change depending…

Coherent BioRay Operator's Manual

Coherent BioRay Operator's Manual

…BioRay Operator's Manual
x
4. Follow the on-screen instructions.
The Coherent Connection software is an optional interface that,
if enabled, can be used to communicate with the RS-232 feature
of the laser. This software is not required to interface and
communicate…

FieldMaxII-TO User Manual

FieldMaxII-TO User Manual

Host Interface
6 - 1
SECTION SIX: HOST INTERFACE
Overview The host interface is intended for use with a National Instruments
LabVIEW virtual instrument (VI) that accesses an ActiveX DLL
called FieldMax2Lib.dll. The DLL handles communication and data
transmission between…

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual

Host Interface
6 - 1
SECTION SIX: HOST INTERFACE
Overview The host interface is intended for use with a National Instruments
LabVIEW virtual instrument (VI) that accesses an ActiveX DLL
called FieldMax2Lib.dll. The DLL handles communication and data
transmission between…

FieldMaxII-P User Manual

FieldMaxII-P User Manual

Host Interface
6 - 1
SECTION SIX: HOST INTERFACE
Overview The host interface is intended for use with a National Instruments
LabVIEW virtual instrument (VI) that accesses an ActiveX DLL
called FieldMax2Lib.dll. The DLL handles communication and data
transmission between…

LaserCam-HR II User Manual

LaserCam-HR II User Manual

LaserCam-HR II User Manual
3 - 2
USB Cable Connect the USB 2.0 cable to the USB 2.0 connector on the
LaserCam-HR II camera (see Figure 3-1).
Do not connect the USB cable to the computer until instructed
to do so.
LaserCam-HR II will interface through the USB 2.0…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…in Figure 4-1, there are three control
interfaces for the J-5 Series consisting of:
1. Real time I/O
2. Extended I/O
3. Embedded diagnostic interface
Figure 4-1 and Table 4-1 provide a brief description of these interfaces and manual locations providing complete information.…

Coherent Magnum II Laser Operator's Manual

Coherent Magnum II Laser Operator's Manual

User Interface
2 - 7
Separate Driver
(SD) Option:
Additional
Panels
The separate driver option of the Magnum II has a laser head unit as
well as a laser driver unit. The laser driver includes a laser cable with
a connector permanently attached to it for…

Revolution High-Power Q-Switched Laser System Preinstallation Manual

Revolution High-Power Q-Switched Laser System Preinstallation Manual

Revolution Laser Preinstallation Manual
2 - 2
Laser Head
Assembly
The Revolution optical laser head is a sealed monolithic chassis,
containing integrated opto-mechanical, electrical, and cooling
assemblies, including:
· A diode-pumped, water-cooled, Nd:YLF laser…

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

…feature a signal connector for the temperature control
feedback. An RS232 cable must be connected between the laser
head-chiller interface and the female chiller port.
NOTICE!
Do not bend the optical fiber to a bend radius less than 15 cm.
Optical fibers will be damaged.…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions