Search Results

1 - 12 of 14 Products for 'J 5 10.6' Page 1 of 2 |

J 5 10.6

DIAMOND J-3-5 CO Laser - 5µm

DIAMOND J-3-5 CO Laser - 5µm

…of approximately 5 µm, as opposed to 10.6 µm for CO 2 lasers. Since some materials which transmit at the longer wavelength absorb at 5 µm, and vice versa, this leads to advantages in various materials processing applications. For example, there is stronger absorption at 5 µm in certain plastic…

COHR DIAMOND J-5 DS 1117 1.pdf

COHR DIAMOND J-5 DS 1117 1.pdf


SPECIFICATIONS Diamond Diamond Diamond Diamond
J-5-9.4 J-5-10.2 J-5-10.6 J-5-10.6NB
Wavelength (m) 9.36 ±0.05 10.25 ±0.5 10.2 to 10.8 10.6 ±0.05
Output Power2 (W) 400 400 450 450
Power Range3 (W) 40 to 400 40 to 400 45 to 450 45 to 450
Typical Peak Power4 (W) 1700 1450…

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…This product is intended for use solely as a component of an OEM product and does not
comply with CDRH performance standards, 21 CFR subchapter J, if operated as a standalone instrument.
1280 Blue Hills Ave, Bloomfield, CT 06002
MFD /
MFD /
MFD /
MFD / : YYYY-MM-DD

COHR DiamondJ-5 DS 0119 1.pdf

COHR DiamondJ-5 DS 0119 1.pdf

…J-5-9.4
Diamond
J-5-10.2
Diamond
J-5-10.6
Diamond
J-5-10.6NB
Wavelength (m) 9.36 ±0.05 10.25 ±0.05 10.2 to 10.8 10.6 ±0.05
Output Power2 (W) 400 400 450 450
Power Range3 (W) 40 to 400 40 to 400 45 to 450 45 to 450
Typical Peak Power4 (W) 1700 1450…

COHR DIAMOND J-3 DS 0617 1.pdf

COHR DIAMOND J-3 DS 0617 1.pdf

Diamond J-3 Series Datasheet
SPECIFICATIONS Diamond Diamond Diamond
J-3-9.4 J-3-10.2 J-3-10.6
Wavelength (m) 9.36 ±0.05 10.25 ±0.1 10.6 ±0.4
Output Power2 (W) 250 225 250
Power Range3 (W) 10 to 225 10 to 225 10 to 250
Nominal Peak Power4 (W) 750
Power Stability2,5…

COHR DiamondJ-2 DS 0518 2.pdf

COHR DiamondJ-2 DS 0518 2.pdf

Diamond J-2 Datasheet
SPECIFICATIONS1 Diamond J-2-9.4 Diamond J-2-10.2 Diamond J-2-10.6
Wavelength (m) 9.36 ±0.4 10.25 ±0.1 10.6 ±0.4
Output Power2 (W) 160 150 180
Power Range3 (W) 15 to 160 15 to 150 15 to 180
Typical Peak Power4 (W) 450 400 450
Power Stability2,5 (%)…

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…FS 0.25 to 10.6 100 mW 150W 10 mW 0.5 to 10 19 HTD 10600 5 LM DB-25
1098452 LM-150 LS 0.25 to 10.6 100 mW 150W 10 mW 0.5 to 10 19 HTD 10600 5 LM DB-25
1098450 LM-200 220V 0.25 to 10.6 100 mW 200W 10 mW 0.5 to 100 19 HTD 10600 5 LM DB-25
1098440 LM-200 110V 0.25 to 10.6 100 mW 200W…

compatibility matrix 02

compatibility matrix 02

…C-30 10.6 um FieldMaxII-TO PM30 C-40, C-55 C-70, J-2 10.6, 9.4 um FieldMaxII-TO PM150 J-3-5 CO Laser 5um FieldMaxII-TO PM300, PM300F E-150, GEM-100, G-100, G-150, G-100i 10.6, 9.4 um FieldMaxII-TO PM150 E-250, E250i, J-3 10.6, 9.4 um FieldMaxII-TO PM300F-19 E-400, E-400i, E-1000, J-5, K-500 10.6 um…

Industrial Laser Solutions - May/June 2015

Industrial Laser Solutions - May/June 2015

…340W at 10.6µm. There are many benefts when materials processing at 5µm, the foremost of which is the "light-material" interaction advantage. At 5µm output, it will have signifcantly different interactionscomparedto CO 2 laser output simply due to the different absorption coeffcients. It has…

Coherent-new-lasers-improve-glass-cutting-methods wp.pdf

Coherent-new-lasers-improve-glass-cutting-methods wp.pdf

…similar to the CO2
laser,
but with some important differences. Specifically, glass absorption of the 5 µm to 6 µm output
of the CO laser is significantly lower than at 10.6 µm, allowing the light to penetrate much further
into the bulk material. Thus, heat is introduced to the…

COHR META1.5C DS 0817 2.pdf

COHR META1.5C DS 0817 2.pdf

…Linear encoders with 2 micron resolution in closed loop with brushless servo motors
Accuracy2 25 m (0.001 in.) positioning accuracy
5 m (0.0002 in.) repeatability
Contouring Full look-ahead contouring capability
Materials Acrylic, PET, PI, Silicon Rubber, Wood, MDF

Microsoft Word - NovusLight 2018-07 Microelectronics Packaging

Microsoft Word - NovusLight 2018-07 Microelectronics Packaging

…Coherent, are similar to CO2
technology, except that they output at a wavelength of ~5 µm. Absorption of this shorter
wavelength in LTCC is significantly lower than at the CO2
wavelength of 10.6 µm. This allows
the laser to penetrate farther into the substrate, creating a deeper…