Search Results

Refine

Result Type

1 - 6 of 6 Products for 'J 5 9.4' Page 1 of 1 |
  • 1

J 5 9.4

COHR DIAMOND J-5 DS 1117 1.pdf

COHR DIAMOND J-5 DS 1117 1.pdf

…(35 psi) at 9.5 l/min. (2.5 gpm)
Coolant Maximum Static Pressure (kPa) 827 (120 psi)
ENVIRONMENTAL CONDITIONS
Ambient Temperature 5 to 45°C (41 to 113°F)
Relative Humidity11 (non-condensing) (%) 95
Altitude 2000 m (6500 ft.)
1 All specifications apply when the product…

COHR DiamondJ-5 DS 0119 1.pdf

COHR DiamondJ-5 DS 0119 1.pdf

…(35 psi) at 9.5 l/min. (2.5 gpm)
Coolant Maximum Static Pressure (kPa) 827 (120 psi)
ENVIRONMENTAL CONDITIONS
Ambient Temperature 5 to 45°C (41 to 113°F)
Relative Humidity11 (non-condensing) (%) 95
Altitude 2000 m (6500 ft.)
1 All specifications apply when the product…

COHR DIAMOND J-3 DS 0617 1.pdf

COHR DIAMOND J-3 DS 0617 1.pdf

…(15 psi) at 5.7 l/min. (1.5 gpm)
Coolant Maximum Static Pressure (kPa) 827 (120 psi)
ENVIRONMENTAL CONDITIONS
Ambient Temperature 5 to 45°C (41 to 113°F)
Relative Humidity11 (non-condensing) (%) 95
Altitude 2000 m (6500 ft.)
1 All specifications apply when the product…

COHR DiamondJ-2 DS 0518 2.pdf

COHR DiamondJ-2 DS 0518 2.pdf

…(15 psi) at 5.7 l/min. (1.5 gpm)
Coolant Maximum Static Pressure (kPa) 827 (120 psi)
ENVIRONMENTAL CONDITIONS
Ambient Temperature 5 to 45°C (41 to 113°F)
Relative Humidity11 (non-condensing) (%) 95
Altitude 2000 m (6500 ft.)
1 All specifications apply when the product…

compatibility matrix 02

compatibility matrix 02

…C-20, C-30 10.6 um FieldMaxII-TO PM30 C-40, C-55 C-70, J-2 10.6, 9.4 um FieldMaxII-TO PM150 J-3-5 CO Laser 5um FieldMaxII-TO PM300, PM300F E-150, GEM-100, G-100, G-150, G-100i 10.6, 9.4 um FieldMaxII-TO PM150 E-250, E250i, J-3 10.6, 9.4 um FieldMaxII-TO PM300F-19 E-400, E-400i, E-1000, J-5, K-500…

COHR META1.5C DS 0817 2.pdf

COHR META1.5C DS 0817 2.pdf

…Linear encoders with 2 micron resolution in closed loop with brushless servo motors
Accuracy2 25 m (0.001 in.) positioning accuracy
5 m (0.0002 in.) repeatability
Contouring Full look-ahead contouring capability
Materials Acrylic, PET, PI, Silicon Rubber, Wood, MDF

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions