Search Results

Refine
1 - 12 of 19 Products for 'J power Pro' Page 1 of 2 |
Related Categories: J-power Pro | Calibration Services

J power Pro

J-Power Pro Energy Sensor DB-25-to-BNC Adapter

J-Power Pro Energy Sensor DB-25-to-BNC Adapter

--> J-Power Pro Sensor Adapter DB-25-to-BNC Adapter Compact sensor adapter to power the active sensor circuit in DB-25 EnergyMax and PowerMax-Pro sensors. The J-Power Pro is a compact sensor adapter that powers the active sensor circuit in DB-25 EnergyMax and PowerMax-Pro sensors and passes the raw…

PowerMax-Pro USB/RS Sensors

PowerMax-Pro USB/RS Sensors

Power (W) 200 200 200 200 200 200 2000 (use for >1 μsec pulses up to CW) Maximum Intermittent Power (W) (1 μsec pulses up to CW) Maximum Intermittent Power (W) (<5 min.) 65 (air-cooled) 65 (air-cooled) 150 (maximum) 150 (maximum) 65 (air-cooled) 65 (air-cooled) 75 (air-cooled) Noise Equivalent Power

Multipurpose EnergyMax Sensors

Multipurpose EnergyMax Sensors

…energy and/or repetition rate range.Specifically, these heat sinks allow 25 mm sensors to be used up to 15 W average power, and 50 mm sensors to be used up to 24 W average power. Drawing Packages Click the links below to download a complete drawing package for these products. J-10 Family J-25 Family…

C24 Program

C24 Program

Power Water-Cooled Thermopile Sensors - to 5 kW (RoHS) PM1K PM3K PM5K PM/PS Model High Sensitivity Thermopile Sensors - to 2W (RoHS) PM3 PS10 PS19 PS19Q PM Off-the-shelf OEM Power Sensors (RoHS) PM10-19A PM150-19B PM Water-Cooled Thermopile Sensors - to 150W (RoHS) PM150-50C USB and RS-232 Power

High Rep-Rate EnergyMax Sensors

High Rep-Rate EnergyMax Sensors

…Specifically, these heat sinks allow the J-25MT-10KHZ sensor to be used up to 30W average power, and the J-50MT-10KHZ sensor to be used up to 50W average power. The table outlines the average power handling capability when the sensors are used with optional user installable heat sinks. Drawing…

Excimer Laser EnergyMax Sensors

Excimer Laser EnergyMax Sensors

…maximum energy or average power range. Specifically, these heat sinks allow the J-25MUV-193 & -248 sensors to be used up to 18 W average power, and the J-50MUV-193 & -248 sensors to be used up to 43 W average power (both at 193 nm). The table outlines the average power handling capability…

Instrument Accessories

Instrument Accessories

…between Coherent thermal and optical sensors and the meters listed in the meter compatibility matrix. J-Power Pro Energy Sensor J-Power Pro Energy Sensor Compact sensor adapter that powers the active sensor circuit in DB-25 EnergyMax and PowerMax-Pro sensors. Visit the Support & Download Center…

LabMax-Pro-Data-Sheet FORMFIRST.pdf

LabMax-Pro-Data-Sheet FORMFIRST.pdf

…the Federal Regulations (21 CFR Subchapter J)
as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after
August 2, 1976.
Coherent offers a limited warranty for all LabMax-Pro SSIM laser power and energy meters. For full details of this…

COHR PowerMax-Pro USB-RS DS 1017 4.pdf

COHR PowerMax-Pro USB-RS DS 1017 4.pdf

…(13.8 ft.)
Part Number
USB 1342379 1342380
RS-232 1342381 1342382
1 Water flow rate for water-cooled sensors must be >0.5 GPM (>2 LPM).
2 For pulses shorter than 1 µsec, use the maximum pulse energy density and average power specifications instead of peak power.

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

…of power to 1 milliwatt
Watts--derived unit of power defined as joules per second.
Joules--derived unit of energy defined as the amount of work
required to produce one watt of power for one second.
Command: CONFigure:MEASure:MODe {DBM|J|W}
Default is W (Watts) - J (Joules)…

COHR PowerMax-Pro HP DS 0117 3 FINAL.pdf

COHR PowerMax-Pro HP DS 0117 3 FINAL.pdf

…Average Power Range1 (W) 3 to 350
(22W max air-cooled, cont.)
(75W max air-cooled, 5 min.)
Max. Pulsed Peak Power (W) 2000
Noise Equivalent Power (mW)
Standard Mode (10 Hz) <150
High Speed Mode (20 kHz) <200
Snapshot Mode (625 kHz) <300
Max. Power

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…J-Power Pro Sensor Adapter
For direct analog measurement of
EnergyMax and PowerMax-Pro sensors,
use J-Power Pro with a scope
Test Slides
POWER
& ENERGY
Custom
& OEM
BEAM
DIAGNOSTICS
CALIBRATION
& SERVICE
Power
&…