…measurement as well as average power of pulsed systems from the nW to mW level, across a broad range of wavelengths. These sensors have a removable light shield on the front used to block stray light. Features
* Pulse energy measurement down to 750 pJ
* Average power measurement of pulsed sources…
LabMax Meters Laser Power and Energy Meters Features · Compatible with all LM-model and PM-model thermopile and optical sensors · Beam position display with quadrant thermopiles (LM-model) · Pulse energy from single shot to 10 kHz with energy sensors · PC interfacing via USB or RS-232, plus analog…
LabMax Meters Laser Power and Energy Meters Features · Compatible with all LM-model and PM-model thermopile and optical sensors · Beam position display with quadrant thermopiles (LM-model) · Pulse energy from single shot to 10 kHz with energy sensors · PC interfacing via USB, GPIB or RS-232, plus…
LabMax User Manual Addendum
Page 2 of 16
Dip Switch (OEM
Setting the Dip switch to OEM mode ensures that if power is lost
while the meter is in use, it will automatically turn back on again
when power is restored. The benefit of this mode is that, following
…describe how to connect a
sensor to your LabMax meter, take measurements within minutes,
and save your data for later viewing.
· Measuring power with a thermopile or optical sensor (p. 9)
· (LabMax-TOP meter only) Measuring energy with a pyroelectric…
User Manual LabMax-Pro SSIM Laser Power Meter TM
…7.2V 750 mAh NiMH Rechargeable Battery Pack for FieldMaxII
1110945 7.4V 5100 mAh Li-ion Rechargeable Battery Pack for LabMax
Part Number Description
1105427 12V External Power Supply for FieldMate, FieldMaxII, LabMax,
…Clears the Capture buffer of all
previous data. Once the process is completed, the
following screen appears.
Restore System Defaults: Clears all internal user
settings to factory defaults. Power off the meter or
unplug it from the tablet before pressing the Ok button.
If the application does not automatically find the
attached meter, tap the Connect button in the Title
If the attached meter is still not identified, with the
power ON, unplug and then plug in the USB
3. Set/verify the options listed…
…the PowerMax-Pro sensor to the LabMax-Pro meter by
connecting the DB-25 connector.
3. Attach the LabMax-Pro meter to the PC via a USB 2.0 HighSpeed port.
4. Connect the power supply to the LabMax-Pro meter.
5. Turn on the meter.
6. Start LabMax-Pro PC.
7. If a dialog…
Added support for LabMax Pro power meter
Added support for GenTec P-Link power meter
The WelcomeForm now looks better when the PC is using large fonts
Tweak to the SettingsForm to prevent a problem when using a USB power meter on a PC
with no COM ports
…in a standalone meter has been
reduced in size to the extent that it can now fit inside a
USB connector.The circuitry and USB connector have been
adapted into a`PowerMax-USB'cable that can be integrated
to most Coherent power sensors providing accurate power