Search Results

1 - 12 of 56 Products for 'Laser Chiller' Page 1 of 5 |

Laser Chiller

HYPER RAPID Lasers | Coherent

HYPER RAPID Lasers | Coherent

…min from chiller start High Power Industrial Picosecond Laser - The HYPER RAPID family of high power industrial picosecond lasers is the higher power version of the transient-amplifier RAPID-series. THE HYPER RAPID family consists of a 50W and a 100W model and uses a novel LUMERA LASER Technology…

RAPID FX

RAPID FX

…External Comms Ethernet Supply Voltage [100 - 265] VAC Power Consumption <1500W Temperature (non-condensing) - Laser Head +15 to 30°C (59 to 86°F) Temperature (non-condensing) - Chiller +15 to 30°C (59 to 86°F) Vibration <0.15 g Temperature -10 to +50°C (-14 to 122°F) Temperature Gradient 15°C…

HyperRapid NX - Industrial Picosecond Laser

HyperRapid NX - Industrial Picosecond Laser

…efficiency. The HyperRapid NX laser head is a self-contained system where all optical elements, control electronics, and thermo-mechanical management are integrated. It complies with state-of-the-art safety regulation and it is complemented by a selection of off-the-shelf chillers and power supplies…

Laser Marking Workstations

Laser Marking Workstations

…selected laser source):
* Mark field diameters from 3.5” to 14.9” (88.9mm–380mm)
* Circumferential marking module (oscillating table configuration only)
* Digital readout, motorized or programmable upgrade of Z-Axis
* Refrigerated recirculating water chiller for all LME-RM versions (laser dependent)…

Picosecond laser

Picosecond laser


Connecters Laser head
Hyper Rapid-AOM
The application signal-connecters of the Hyper Rapid-AOM
are located on the rear side of the laser head:
Figure 9: Laser head Hyper Rapid-AOM, rear side
1 Chiller hose, cold water inlet from chiller
2 Chiller hose, outlet to…

00 Laser Cooling.book

00 Laser Cooling.book

…by the laser is removed in the
heat exchanger, which must itself be cooled by either liquid or
air.
· Closed-loop chiller: The cooling water circulates around a
closed path that includes the laser and a chiller. The heat generated by the laser is removed in the chiller, typically…

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

chiller.
"Receiving and Inspection" on page 3-1
Utility
Requirements

Seed Laser

Pump Laser

Synchronization & Delay Generator (SDG Elite)

Laptop Computer

Chiller, Pump Laser
"Astrella Utility
Requirements" on
page 3-4
Chiller

Pump Laser:

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

…Assembly 1153866
Paladin Laser Chiller for Remote Temperature Sensor for Paladin 8W/10W 1114080
Laser Chiller for Remote Temperature Sensor and Remote Set Temperature P307 1151418
Shipping Crate for Chiller Paladin 355 1048245
Replacement Filter for Chiller 1037668
Corrosion…

Laser Focus World - January 2018

Laser Focus World - January 2018

…costs. Such
systems are often cooled by laser chillers,
which can operate via either TEC or via
other types of refrigeration, predominantly vapor compression. Optitemp (Traverse
City, MI) makes various types of refrigeration chillers, including portable (rollable)
liquid-…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…of the laser system.
If any other components are included in the cooling loop, they must
not reduce the coolant flow to the laser head, and any heat
absorbing/generating components must come after the laser system.
Chiller Electrical
Supply
A large industrial chiller

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…3-1. The delivery system
and/or laser power detector may be connected in parallel auxiliary
loops as long as they do not reduce the required flow to the laser, or
they may be cooled by a separate chiller.
Coolant Temperature At the laser head, the inlet temperature of the cooling…

Paladin Advanced Preinstallation.book

Paladin Advanced Preinstallation.book


the laser head and chiller. Activate the chiller query with the service
command "CH=1" (see Table 6-3 on page 6-5)
Active Chiller Control The Paladin chiller is preset for "active chiller". "Active chiller"
enables the chiller to get temperature feedback from the laser head

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions