Search Results

37 - 48 of 147 Products for 'Laser Collimator' Page 4 of 13 |

Laser Collimator

Coherent Magnum II Laser Operator's Manual

Coherent Magnum II Laser Operator's Manual

…Coherent Magnum II lasers include a built-in focus adjustment
mechanism. To change the focus at a specified working distance,
follow these instructions:
1. Loosen the locking screw. This will release the pressure on the
focusing optics, allowing the collimator to be moved.

Microsoft Word - 115-80040-001 Compact Laser Module Manual.doc

Microsoft Word - 115-80040-001 Compact Laser Module Manual.doc

…the laser diode, it would overcome the grating-induced
stabilization, unlocking and shifting the wavelength of the laser beyond the pass band of the filter.
This will dramatically increase the reflected intensity back into the laser possibly causing
damage.
Collimating Lens…

Microsoft Word - 115-80046-001 RO USB Laser Module Manual.doc

Microsoft Word - 115-80046-001 RO USB Laser Module Manual.doc

…the laser diode, it would overcome the grating-induced
stabilization, unlocking and shifting the wavelength of the laser beyond the pass band of the filter.
This will dramatically increase the reflected intensity back into the laser possibly causing
damage.
Collimating Lens…

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

…wear laser safety
glasses as required by the wavelength being generated.
7. Avoid direct exposure to the laser light. The intensity of the
beam can easily burn personnel and ignite clothing.
8. Use the laser in an enclosed room. Laser light will remain
collimated over long…

Coherent StingRay Laser Safety and Installation Quick Start Guide

Coherent StingRay Laser Safety and Installation Quick Start Guide

…the system must wear laser safety eyewear as required by the wavelength being created. · Use the laser in an enclosed room. Laser light remains collimated for long distances and presents a possible hazard if not controlled. · Display warning signs in the area of the laser beam to tell persons of…

Compact Single Mode Tunable Laser Using a Digital Micromirror Device.pdf

Compact Single Mode Tunable Laser Using a Digital Micromirror Device.pdf

…by the red and blue paths reflected from the VHG. LD: laser diode,
VHG: volume holographic grating, PBS: polarizing beam-splitter, /4: quarter-wave plate
The p-polarized beam from the laser diode LD (Eagleyard) is collimated by lens L1 and
propagates through the polarizing beam…

Industrial Laser Solutions - March/April 2016

Industrial Laser Solutions - March/April 2016

…bar
Collimating optics
Collimating optics Focusing optics
Dichroic
beamsplitter
Output
coupler
High
reflector
Cladding-pumped
active fiber
Delivery fiber
Final
output
www.industrial-lasers.com MARCH/APRIL 2016 Industrial Laser

Laser Focus World - January 2018

Laser Focus World - January 2018

…between the
LD and the cooled mount.
Cooling for high powers
For materials processing ("direct diode" laser systems, as well as pumping
of DPSS and fiber lasers), as well as a
few other uses (military-laser pumping,
drilling oil wells, and perhaps someday propelling…

Laser Focus World - September 2015

Laser Focus World - September 2015

Removable
ND filter
4× M2×2.8
12
12
15
15
9.85
11.50
4× M2×3.5
USB2.0
connector
Laser Focus World www.laserfocusworld.com
determine the 2D profile of an uncorrected wavefront, which
is then fed into a deformable mirror or other…

Laser Focus World - May 2015

Laser Focus World - May 2015

…ultrafast lasers to produce a supercontinuum. The devices come in two
types: one that produces octave-spanning
white-light output, and the other that has
a double-peaked output especially tailored
for CARS applications.
The company's SuperK Extreme supercontinuum lasers,

Coherent StingRay Developer's Kit Laser Safety and Installation Quick Start Guide

Coherent StingRay Developer's Kit Laser Safety and Installation Quick Start Guide

…should wear laser safety glasses as required by the wavelength being generated.
· Use the laser in an enclosed room. Laser light remains collimated over long distances and
therefore presents a potential hazard if not confined.
· Post warning signs in the area of the laser beam to…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…reflections at the J-3 Series wavelength are invisible.
Eye safety is a great concern when using a high-power laser such as
the J-3 Series laser. The long NOHD for the collimated beam highlights the need to avoid stray specular reflections from polished or
shiny surfaces. These…