Search Results

1 - 12 of 115 Products for 'Laser Collimator' Page 1 of 10 |

Laser Collimator

Microsoft Word - Understanding Laser Beam Parameters Leads to Better System Performance and Can Save Money Final.doc

Microsoft Word - Understanding Laser Beam Parameters Leads to Better System Performance and Can Save Money Final.doc

…seems to be appropriate when it
comes to a laser's divergence specification.
Beams with a very small divergence, i.e. with an almost constant beam diameter over a significant propagation
distance are generally called "collimated beams".
To measure divergence correctly with…

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

Laser Safety
1 - 3
9. Terminate the laser beam with a light-absorbing material.
Laser light can remain collimated over long distances and
therefore presents a potential hazard if not confined. It is good
practice to operate the laser in an enclosed room.
10. Post laser

Revolution High-Power Q-Switched Laser System Preinstallation Manual

Revolution High-Power Q-Switched Laser System Preinstallation Manual

…access to the laser to qualified users who are familiar
with laser safety practices. When not in use, lasers should be
shut down completely and made off-limits to unauthorized
personnel.
9. Use the laser in an enclosed room. Laser light may remain
collimated over long…

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

…access to the laser to qualified users who are familiar
with laser safety practices. When not in use, lasers should be
shut down completely and made off-limits to unauthorized
personnel.
9. Use the laser in an enclosed room. Laser light may remain
collimated over long…

Coherent Magnum II Laser Operator's Manual

Coherent Magnum II Laser Operator's Manual

…Coherent Magnum II lasers include a built-in focus adjustment
mechanism. To change the focus at a specified working distance,
follow these instructions:
1. Loosen the locking screw. This will release the pressure on the
focusing optics, allowing the collimator to be moved.

Microsoft Word - 115-80040-001 Compact Laser Module Manual.doc

Microsoft Word - 115-80040-001 Compact Laser Module Manual.doc

…the laser diode, it would overcome the grating-induced
stabilization, unlocking and shifting the wavelength of the laser beyond the pass band of the filter.
This will dramatically increase the reflected intensity back into the laser possibly causing
damage.
Collimating Lens…

Microsoft Word - 115-80046-001 RO USB Laser Module Manual.doc

Microsoft Word - 115-80046-001 RO USB Laser Module Manual.doc

…the laser diode, it would overcome the grating-induced
stabilization, unlocking and shifting the wavelength of the laser beyond the pass band of the filter.
This will dramatically increase the reflected intensity back into the laser possibly causing
damage.
Collimating Lens…

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

…wear laser safety
glasses as required by the wavelength being generated.
7. Avoid direct exposure to the laser light. The intensity of the
beam can easily burn personnel and ignite clothing.
8. Use the laser in an enclosed room. Laser light will remain
collimated over long…

Coherent StingRay Laser Safety and Installation Quick Start Guide

Coherent StingRay Laser Safety and Installation Quick Start Guide

…the system must wear laser safety eyewear as required by the wavelength being created. · Use the laser in an enclosed room. Laser light remains collimated for long distances and presents a possible hazard if not controlled. · Display warning signs in the area of the laser beam to tell persons of…

Compact Single Mode Tunable Laser Using a Digital Micromirror Device.pdf

Compact Single Mode Tunable Laser Using a Digital Micromirror Device.pdf

…by the red and blue paths reflected from the VHG. LD: laser diode,
VHG: volume holographic grating, PBS: polarizing beam-splitter, /4: quarter-wave plate
The p-polarized beam from the laser diode LD (Eagleyard) is collimated by lens L1 and
propagates through the polarizing beam…

Industrial Laser Solutions - March/April 2016

Industrial Laser Solutions - March/April 2016

…bar
Collimating optics
Collimating optics Focusing optics
Dichroic
beamsplitter
Output
coupler
High
reflector
Cladding-pumped
active fiber
Delivery fiber
Final
output
www.industrial-lasers.com MARCH/APRIL 2016 Industrial Laser

Laser Focus World - January 2018

Laser Focus World - January 2018

…between the
LD and the cooled mount.
Cooling for high powers
For materials processing ("direct diode" laser systems, as well as pumping
of DPSS and fiber lasers), as well as a
few other uses (military-laser pumping,
drilling oil wells, and perhaps someday propelling…