Search Results

Refine

Result Type

13 - 17 of 17 Products for 'Laser Cooling Water Guidelines' Page 2 of 2 |

Laser Cooling Water Guidelines

00 E-250 Pre.book

00 E-250 Pre.book

…OEM Lasers Operator's Manual
3 - 12
Guidelines for Use of
Compressed Air for
Purge
If nitrogen is not available, the alternative is clean, dry, oil-free
compressed air. Compressed air is available in many facilities but
typically is contaminated with water and oil…

00 M5C Pre Install.book

00 M5C Pre Install.book

…is contaminated with water and oil vapors. The purity
requirements for the compressed air are:
1. Filtered to remove particles larger than 1 micron.
2. Dried so that dew point is 10°C (18°F) lower than the inlet
cooling fluid temperature to the laser.
3. Oil free to better…

Diamond g50 100 Quiksetup.pdf

Diamond g50 100 Quiksetup.pdf

…DESCRIPTION The G-50/100 is an OEM device consisting of a laser resonator and integrated RF driver. The input requires 48 VDC, cooling water, and electrical drive signals in order to operate. SAFETY The unit is an OEM device; the laser alone does not conform to CDRH or other standards. It is the…

COHR PowerMax-Pro DS 0917 3.pdf

COHR PowerMax-Pro DS 0917 3.pdf

…those types of lasers. Lasers of this type within the Coherent portfolio include the Matrix QS, Avia NX, Flare NX, Helios (the
regular "HD" models are not appropriate for these short pulsed, high energy lasers).
2 Contact Coherent for 355nm usage guidelines.
3 Water flow rate for…

MerMAIDs: a family of metagenomically discovered marine anion-conducting and intensely desensitizing channelrhodopsins

MerMAIDs: a family of metagenomically discovered marine anion-conducting and intensely desensitizing channelrhodopsins

…Ti:Sapphire laser (Chameleon Vision-S, Coherent) was set to 810 nm to
excite mCerulean, and a high power femtosecond fiber laser (Fidelity-2, Coherent,
Santa Clara, CA) was used to excite citrine at 1070 nm.
Animal procedures were in accordance with the guidelines of local authorities…