…imperial or metric bolt pattern
* Proven stable performance over time and temperature
* Laser can be mounted on top or side for opposite polarization Datasheet OBIS Heat Sink Drawing OBIS Heat Sink Heat Sink with Fan for Thermal Management - Convenient 69 mm (2.7 inch) beam height Output beam…
…damaging your sensor when measuring unknown beam, insert the test slide into the beam and then examine for damage. EnergyMax Heat Sink Accessories EnergyMax Heat Sink Accessories Accessories to help increase the average power capability of EnergyMax sensors. Fiber Optic Connector Adapters Fiber…
…High accuracy, spectral compensation characteristics built into each unit
* Onboard sensors provide automatic temperature compensation
* Modular heat sinks to extend measurement range
* Compact size to enable measurements within instruments
* Molded cable with bend and strain relief protects against…
…Laser Diode Module Accessories Get the most of your StingRay laser by utilizing one of its many easy-to-integrate accessories. For more information, contact firstname.lastname@example.org. Part Number Model 1232091 StingRay Power Supply - Laser 1280838 StingRay Multi-Axis Mount 1222896 StingRay Heat Sink…
…1 Typical value.
2 Measured from the output face, negative value corresponds to a location inside the laser head.
3 Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included).
4 Air cooling available with appropriate heat sink and fans.
…Corporation. Drawing CUBE Heat Sink CUBE Laser Diode Module Accessories - Optimize your CUBE laser diode module accessories with one of many options. For more information, contact email@example.com. CUBE ACCESSORIES NAME DESCRIPTION 1073840 CUBE Heat Sink Accessory CUBE heat sink with fan, 127…
The diode bars in TRUMPF's directdiode systems are mounted on a passively cooled heat sink, eliminating the
need for high-quality deionized (DI) water and eliminating microchannel failure,
explains Ryba (see Fig. 2).
"The final fiber-coupled direct-diode laser uses wavelength…
…Circular Beam (RoHS) CUBE Connection LabVIEW Sample Datasheet CUBE Datasheet CUBE Operator's Manual Drawing CUBE Lasers 3D Drawing Drawing Heat Sink for CUBE CUBE Diode Laser System - For inquiries, please contact firstname.lastname@example.org. Part Name Description 1112774 CUBE 375-16C System, 375…
…recommended to operate the laser with these
Diode Pump Module heat sink temperature
The diode pump module operating temperature is held constant by
TECs. Excess heat is dissipated by forced air cooling through heat
sinks. The pump module is located within…
Center of Laser
Beam & Center
of Heat Sink
…high-power laser must be actively cooled, whereas many low-power lasers get by with passive cooling via either some sort of heat sink or just natural airflow (picture, for example, a lowly helium-neon laser resting in a lab mount with no obvious cooling mechanism in sight). Laser diodes (LDs) are a…
laser diode module. A shorting bar is connected by default.
4 Operating Procedures
4.1 Standard CW Operation
Laser module can be operated with or without USB communication port.
User Startup Procedure:
· Properly mount laser module on a heat sink