Search Results

1 - 12 of 74 Products for 'Laser Glass Cutting' Page 1 of 7 |

Laser Glass Cutting

Ahead the New Glass Cutting COHR Rofin Whitepaper.pdf

Ahead the New Glass Cutting COHR Rofin Whitepaper.pdf

laser cut glass can typically
withstand two to three times as much force as mechanically cut glass.
Figure 1. Comparison of mechanically cut (left) and laser cut (right) glass. The mechanically cut glass shows
significant residual stress, and substantial debris from the cutting

HYPER RAPID Lasers | Coherent

HYPER RAPID Lasers | Coherent

…of this industrial ultrafast laser family, the HYPER RAPID 100 is the first ever to offer pulse-on-demand and burst mode operation in a 100W laser system, enabling a whole range of new processes for machining brittle materials such as ceramics, sapphire and glass. Plus, with a lower cost-per-watt…

CO Laser - 5µm

CO Laser - 5µm

CO Laser - 5µm CO Lasers Offer Enhanced Capabilities for Industrial and Medical Applications A new generation of carbon monoxide (CO) lasers from Coherent, promise enhanced processing characteristics in applications ranging from glass, ceramic and film cutting and drilling, through medical and…

Laser Focus World - June 2015

Laser Focus World - June 2015


residual stress in the glass. The result is a
better quality cut, stronger glass, and a
wider cut process window.
The CO laser also enables radial (freeform) glass cutting; in contrast, CO
2
lasers can only produce straight line cuts
because the inherently round…

Whitepaper - USP Lasers Deliver Cleaner Cuts for Semiconductor Packaging.pdf

Whitepaper - USP Lasers Deliver Cleaner Cuts for Semiconductor Packaging.pdf

…processing strategy. Before this work, despite optimization of the laser parameters, cutting
produced an asymmetrical HAZ, some burns and some debris.
For fingerprint sensor cutting, the best results were an essentially perfect cut, which produced a
sufficiently small amount of debris…

The Monaco diode-pumped femtosecond industrial laser

The Monaco diode-pumped femtosecond industrial laser

…applications such mobile device manufacturing, glass cutting, OLED display processing, wafer cutting, and chip-level packaging, just to name a few. Contact Us About This Product Close PRICE HERE Diode-Pumped Femtosecond Industrial Laser The Monaco laser provides a 80 μJ/pulse at 750 kHz to enable…

IndPhotonics Micromachining Glass Cutting.pdf

IndPhotonics Micromachining Glass Cutting.pdf

…mechanical glass cutting can lead to microcracks and debris.
Laser glass cutting, based on CO
2
and
nanosecond solid-state lasers, has been
in use for some time in the display industry. Both of these lasers produce dramatically better results than mechanical cutting, but can…

CO Lasers from Lab to Fab

CO Lasers from Lab to Fab

…L = 1110.17 µm
L = 269.88 µm
Fig. 2 A 270 µm deep cut (25 %) in a 1.1 mm thick glass substrate shows virtually no stress
or microcracking.
Fig. 3 CO laser cutting of 50 µm thick glass produces no
cracks or defects as compared with traditional mechanical
cutting.

COHR WhitePaper High Repetition Rate USP Lasers Improve OLED Cutting Results.pdf

COHR WhitePaper High Repetition Rate USP Lasers Improve OLED Cutting Results.pdf


require that any cutting method deliver 24/7 reliability, with high throughput and a yield above
99.9%. Laser cutting has emerged as the only method for flexible OLED trimming that can meet
all these requirements.
To implement laser cutting, the laser beam is directed through…

Materials Processing & Industrial Applications

Materials Processing & Industrial Applications

…DPSS laser, easily engraves inside the glass. Related Products Monaco HYPER RAPID StarFiber 100-600 Related Product Families Laser Machines and Systems Laser Cutting for Glass Reinforced Plastic & Carbon Fiber Achieve optimal cutting speed and cut quality by using lasers to cut carbon or glass

(No Title Available)

(No Title Available)

…and Medical Applications A new generation of carbon monoxide (CO) lasers from Coherent, promise enhanced processing characteristics in applications ranging from glass, ceramic and film cutting and drilling, through medical and aesthetics fractional skin resurfacing. Data Sheet Diamond J-3-5 CO Laser

DIAMOND E-Series

DIAMOND E-Series

…Materials Processing Graphic Arts Cutting Drilling Printing Scribing Flex Circuit Die Board Metal Plastic Flat Panel Display Paper Foil Wood and Derivatives --> Liquid-Cooled, RF-Excited OEM Industrial CO2 Laser - DIAMOND E-1000 Series are sealed, pulsed CO2 lasers offering maximum powers up to 1 kW…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions