Search Results

1 - 12 of 107 Products for 'Laser Power Detector' Page 1 of 9 |

Laser Power Detector

High-Sensitivity Thermopile Sensors 2W

High-Sensitivity Thermopile Sensors 2W

…spectral response, high sensitivity, and a large active area. These sensors are ideal for measuring small laser diodes and HeNe lasers and small ion lasers. Unlike semiconductor detectors, these sensors have a flat broadband output and will not saturate above 1 mW/cm2. More Information The PS10…

PowerMax-Pro USB/RS Sensors

PowerMax-Pro USB/RS Sensors

…in laser power sensing that utilizes a thin-film detector only microns thick which rapidly senses thermal changes due to incident laser energy. The result is a measurement response time below 10 μs, as compared to over 1 second for traditional thermopiles. These detectors can operate at high power

PowerMax-RS Sensors

PowerMax-RS Sensors

Power Sensor (1174258) PowerMax-RS PM3K Power Sensor (1191293) PowerMax-RS PS19Q Power Sensor (1179504) Related Materials White Papers PowerMax USB RS User Manual PowerMax Water Cooled OEM Detector Applications Note PowerMax RS Sensor Manual Miniaturization Technology Provides Next Generation Laser

Multipurpose EnergyMax Sensors

Multipurpose EnergyMax Sensors

…and strain relief protects against rough handling Coherent’s Multipurpose EnergyMax sensors are economical, pulse energy detectors intended for use with a wide range of lasers operating in the sub-1kHz repetition rate domain. Multipurpose EnergyMax Series sensors feature extremely broad wavelength…

PowerMax-Pro Sensor

PowerMax-Pro Sensor

…CW laser power and pulsed laser energy to be sampled much more frequently, resulting in increased throughput and improved process control. And, their broad spectral response and large active area make these detectors useful with virtually all commercial, scientific, and medical lasers operating…

kW PowerMax Pro Sensor

kW PowerMax Pro Sensor

…that a kW laser measurement reaches steady state in less than 100 microseconds with no overshoot. This capability provides nearly instantaneous high power measurement. In traditional kW thermopile detectors, heat is generated in the absorbing coating when it is struck by the laser. The heat must…

High Peak Power Thermopile Sensors

High Peak Power Thermopile Sensors

…high-peak-power, low repetition rate, Q-switched Nd:YAG lasers. A volume-absorbing substrate mounted in front of the detector absorbs the bulk of the laser energy, thus preventing all of the laser energy from striking the front surface of the detector element. These sensors are intended to be used…

Laser Power Meters and Energy Meters

Laser Power Meters and Energy Meters

…Choosing a Laser Measurement System Choosing a laser measurement system involves the selection of an appropriate laser energy sensor or laser power sensor , and then choosing the type of instrumentation desired to process the analog signal from the detector. The resulting power or energy data…

Large Area High Power Water-Cooled Thermopile Sensors 5kW

Large Area High Power Water-Cooled Thermopile Sensors 5kW

…PM5K-100 provide a range of power capabilities in a 100 mm diameter size, and are also useful for diode bars and large cross-section laser beams. The PM5K-200 features a 200 mm diameter detector, and is specifically intended to measure the power output of large laser diode bar arrays. Drawing…

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

…IR Sensors Very high damage threshold, large area, laser energy sensors optimized for Nd:YAG, Erbium, Ruby and Holmium lasers. Coherent YAG/Harmonics and IR EnergyMax sensors are specifically designed for use with very high energy/peak power lasers operating at low repetition rates, such as those…

High Rep-Rate EnergyMax Sensors

High Rep-Rate EnergyMax Sensors

…and strain relief protects against rough handling Coherent High Repetition-Rate EnergyMax sensors are specifically designed for use with high power lasers operating at repetition rates up to 10 kHz. These sensors feature broad wavelength coverage (190 nm to 2.1 µm) and large active area (up to 50…

High-Sensitivity Optical Sensors

High-Sensitivity Optical Sensors

--> High-Sensitivity Optical Sensors (RoHS) Silicon and germanium photodiodes for laser power measurement with resolution of 1 nW.

Key Features:
* Silicon and Germanium photodiodes
* 0.25 to 1.54 µm range
* Fiber-optic connector (optional)
* 1000:1 attenuator (optional)
* RoHS Compliant Contact Us…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions