Search Results

Refine
25 - 36 of 54 Products for 'Light Meter' Page 3 of 5 |

Light Meter

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…access doors and panels,
and interlock switches or light curtains on all material access gates
and doors.
Laser Power
Measurement
To accurately measure delivered laser power, a calibrated optical
power meter (detector head plus display console) is necessary.
Liquid…

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

…access doors and
panels, and interlock switches or light curtains on all material access
gates and doors.
Laser Power
Measurement
To accurately measure delivered laser power, a calibrated optical
power meter (detector head plus display console) is necessary.
Liquid…

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…access doors and
panels, and interlock switches or light curtains on all material access
gates and doors.
Laser Power
Measurement
To accurately measure delivered laser power, a calibrated optical
power meter (detector head plus display console) is necessary.
Liquid…

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

…access doors and panels,
and interlock switches or light curtains on all material access gates
and doors.
Laser Power
Measurement
To accurately measure delivered laser power, a calibrated optical
power meter (detector head plus display console) is necessary.
Liquid…

00 LMT Pre.book

00 LMT Pre.book

Site Preparation
1 - 9
To power a laser power meter, external laptop computer, trouble
lights, power tools and other test equipment, it is recommended to
provide 115V/20A, 50/60 Hz utility outlets near the LMC system.
The (optional) exhaust blower requires 3-phase, 230/460…

COHR PowerMax-Pro kW DS 0417 5 FINAL.pdf

COHR PowerMax-Pro kW DS 0417 5 FINAL.pdf

…setting up for a measurement. The PowerMax-Pro kW sensor's unique optical design traps >99% of the light inside the enclosure, and when used with a direct QBH fiber adapter option 100% of the light is captured, resulting in a Class 1 measurement system. The new PowerMax-Pro kW models will be…

PowerMax-Pro-White-Paper-Novel-Laser-Power-Sensor-Improves-Process-Control FORMFIRST.pdf

PowerMax-Pro-White-Paper-Novel-Laser-Power-Sensor-Improves-Process-Control FORMFIRST.pdf

…thermoelectric principle in
which thermal energy is converted into electrical
energy. The typical thermopile consists of a central
light absorbing disk, a series of thermocouples that
surround this disk, and an annular heat sink around the
ring of thermocouples (Figure 1).…

CUBE family DSrevD

CUBE family DSrevD

…separately to serve
as a laser emission warning light.
OBIS Laser Emission
Indicator with Interlock
Connector
Part #1190901
Plugs into OBIS Remote or OBIS 6-Laser
Remote interlock connector.
5 meter cable and interlock
connector included.
Spare…

Whitepaper LMC PM-Pro LAM updtd 3 05 19.pdf

Whitepaper LMC PM-Pro LAM updtd 3 05 19.pdf


absorbing disk in the center of the detector and is
converted into heat. This disk is typically coated with a
material that absorbs light over a very broad
wavelength range in order to enhance sensitivity. The
heat then flows across the width of the thermopile disk
to…

300C MotoFred MC-030

300C MotoFred MC-030

…nm. 5 Beam parameter values typical. 6Beam diameter measured at 1/e2 points 1.0 meter from output bezel. 7 Beam diameter measured at 1/e2 points, at the output coupler. 8Full-angle measurement. 9Performance in light regulation with PowerTrackTM over a 30-minute period following a one-hour warm-up.…

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual


2 - 8
The materials used in this sensor are a stack of films which have
layer thicknesses on the order of microns. Incident laser light is
absorbed and generates heat which can flow very quickly through
these thin layers to the heatsink below the detector, where it is…

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

…access doors and panels,
and interlock switches or light curtains on all material access gates
and doors.
Laser Power
Measurement
To accurately measure delivered laser power, a calibrated optical
power meter (detector head plus display console) is necessary.
Liquid…