PowerMax-USB Sensors Laser Measurement device providing direct USB 2.0 connection to a PC.
* PowerMax USB provides direct USB 2.0 connection to PC. Power provided via USB connection.
* Instrumentation platform is compatible with thermopiles and optical sensors and can be adapted to…
…0.5 to 10 19 HTD 10600 2 LM DB-25
1098304 LM-10 0.25 to 10.6 10 mW 10W 1 mW 0.5 to 10 16 HTD 10600 2 LM DB-25
1098456 LM-20 0.25 to 10.6 100 mW 20W 10 mW 0.5 to 10 19 HTD 10600 2 LM DB-25
1098320 LM-45 0.25 to 10.6 100 mW 45W 10 mW 0.5 to 10 19 HTD 10600 2 LM DB-25
Thermal SmartSensorTM Adapter
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent's LabMax meters are compliant with the EU Restriction of Hazardous Substances (RoHS) and Waste Electrical and…
16 Superior Reliability & Performance · www.Coherent.com · LMC.email@example.com
The following fiber-optic adapters can be mounted directly onto the 3/4-32 threads
on the front of LM-3 and LM-10 sensors.These fiber adapters can also be used with
our 1.035-40M adapter ring to fit…
Position Sensing Air-Cooled Thermopile Sensors to 200W (RoHS) Low-to medium-power pulsed & CW lasers from 10 mW to 200 W.
* 10 mW to 200W range
* Broadband coatings
* 0.25 to 10.6 µm spectral range
* Convective air-cooled
* RoHS Compliant Contact Us About This Product PRICE HERE…
…J-50MT-10KHZ J-50MUV-248 USB Energy Sensors USB J-10MB-LE USB J-25MB-LE USB J-50MB-YAG Optical Sensors LM-2 VIS OP-2 IR OP-2 VIS DB25 Power Sensors LM Model Thermopile Sensors LM-3 LM-10 LM-45 PM Model Air-Cooled Thermopile Sensors - to 150W (RoHS) PM2 PM10 PM30 PM30X PM Model Fan-Cooled Thermopile…
Fiber Optic Connector Adapters Connect common fiber terminations to threads around entrance apertures. FC and SMA fiber optic adapters are available for several sensor models. Part numbers 1098589 and 1098339 thread onto the 3/4-32 threads around the entrance apertures of the LM-2, OP-2, LM-3,…
Thermal SmartSensor Adapter Provides compatibility between thermal and optical sensors, and meters. The Thermal SmartSensor Adapter provides compatibility between Coherent thermal and optical sensors (LM-model sensors), and the meters listed in the meter compatibility matrix. Contact Us About This…
Laser Wavelength Power Meter Power Sensor Energy Meter Energy Sensor
Laser Measurement & Control Product Compatibility Matrix
Ultrafast Lasers for Science
Mantis 800 nm FieldMaxII-TO PM10 or PS10
Micra 750 to 860 nm FieldMaxII-TO PM10 or…
Connecting the Adapter
The following illustration shows how to connect the
Thermal SmartSensor adapter to a sensor and a meter.
Connect the DB-25 connector on the end of the adapter cable
to the meter.
Connect the adapter to the sensor.
outlines the safe beam sizes for typical CO2 and Nd:YAG kW lasers.
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000
Incident Laser Power (watts)
Minimum Beam Diameter
Please Read Before Continuing
Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.