Search Results

1 - 12 of 139 Products for 'M2 Measurement' Page 1 of 12 |

M2 Measurement

10 Tips White Paper 1 rev9

10 Tips White Paper 1 rev9

Beam quality factor and how your beam propagates.
Mode structure, divergence and the beam quality factor, M², can be measured directly with a beam
propagation analyzer. Knowing enables you to predict how the beam will propagate, how it will
look like elsewhere along the beam…

Mode Master White Paper July 2011 final.pdf

Mode Master White Paper July 2011 final.pdf

…use for production line applications. The
system delivers accurate measurements of M2 and
several other parameters in accordance with ISO
standards; in fact, the ISO standard that defines M2 is
based on the measurement approach implemented in
the Coherent ModeMaster PC.

OBIS Galaxy Datasheet COHR 2018.pdf

OBIS Galaxy Datasheet COHR 2018.pdf

…tested and certified will be >60% power transmission per wavelength as measured with production tooling fixtures.
4 Fiber connector output not compatible for patchcord-to-patchcord connection.
5 M2 measured with ModeMaster with 90/10 Clip Levels.
6 Non-Operational with a…

ModeMaster PC User Manual

ModeMaster PC User Manual

…interpretation of intensity profiles. Utilize the internal measurement
cursor for accurate adjustment of the beam diameter at the pinhole
plane.
A. Current azimuth angle of ModeMaster PC scan head.
Figure 3-10. M2 Measurement Planes and Profile Plane
Drum Pe riphery

OBIS GalaxySystem Datasheet COHR 2018.pdf

OBIS GalaxySystem Datasheet COHR 2018.pdf

…tested and certified will be >60% power transmission per wavelength as measured with production tooling fixtures.
4 Fiber connector output not compatible for patchcord-to-patchcord connection.
5 M2 measured with ModeMaster with 90/10 Clip Levels.
6 Non-Operational with a…

COHR OBIS Galaxy DS 0519 3.pdf

COHR OBIS Galaxy DS 0519 3.pdf

…tested and certified will be >60% power transmission per wavelength as measured with production tooling fixtures.
4 Fiber connector output not compatible for patchcord-to-patchcord connection.
5 M2 measured with ModeMaster with 90/10 Clip Levels.
6 Non-Operational with a…

COHR OBIS CellX DS 0117 3.pdf

COHR OBIS CellX DS 0117 3.pdf

…Specifications are valid for 100% power. For 488 nm and 561 nm any residual laser emission at 808 nm fundamental is <0.1 mW.
3 Beam Quality (M2) measured per laser channel using ModeMaster with 90/10 clip levels.
4 Standard alignment. User adjustable
5 RMS Noise and Peak-to-Peak…

Mode-Master-Whitepaper FORMFIRST.pdf

Mode-Master-Whitepaper FORMFIRST.pdf

…use for production line applications. The
system delivers accurate measurements of M2 and
several other parameters in accordance with ISO
standards; in fact, the ISO standard that defines M2 is
based on the measurement approach implemented in
the Coherent ModeMaster PC.

Microsoft Word - Coherent whitepaper Cube performance Final0910

Microsoft Word - Coherent whitepaper Cube performance Final0910

…single 84/16 far-field M2 measurement can be an insufficient test of performance. Two examples illustrate this point. The original specifications for CUBE lasers included a M2 of < 1.5 at the conventional 84/16 clip levels. (M2 and other beam propagation parameters are measured at Coherent using an…

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

…for applications that require fusion splicing.
5 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
6 M2 measured with ModeMaster with 90/10 Clip Levels.
7 Non-Operational with a before/after change of <10%.
8 Non-Condensing. Not hermetically…

COHR OBIS CellX DS 0719 4.pdf

COHR OBIS CellX DS 0719 4.pdf

…Specifcations are valid for 100% power. For 488 nm and 561 nm any residual laser emission at 808 nm fundamental is <0.1 mW.
3 Beam Quality (M2) measured per laser channel using ModeMaster with 90/10 clip levels.
4 Standard alignment. User adjustable.
5 RMS Noise and Peak-to-Peak…

COHR OBISfamily DS 0818 8.pdf

COHR OBISfamily DS 0818 8.pdf


2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power.
3 M2 measured with ModeMaster with 90/10 clip levels.
4 Typical power-on delay 0.1 minutes.
5 Typically 85% of heat load through the base plate. See…