Ask a Question
Coherent
Search Results
Refine
1 - 12 of 18 Products for 'Manual 3sigma Power Meter' Page 1 of 2 |

Manual 3sigma Power Meter

Book.book

Book.book

Manual 12 Use of EnergyMax sensors at average power levels beyond the base model average power specification--without the optional heat sink--may cause permanent damage to the sensor. Diffuse Metallic EnergyMax sensors are compatible with Coherent LabMax-TOP, 3sigma, EPM1000, and EPM2000 meters.

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

3sigma, FieldMaxII-TOP, FieldMaxII-P, EPM1000 and EPM2000 meters. Both sensors accept an optional heatsink, which can be easily attached by the user to extend the maximum energy or average power range. Specifically, these heat sinks allow the J-25MB-IR sensor to be used up to 15 W average power, and…

Excimer Laser EnergyMax Sensors

Excimer Laser EnergyMax Sensors

…These sensors are compatible with Coherent LabMax-TOP, 3sigma, FieldMaxII-TOP, FieldMaxII-P, EPM1000 and EPM2000 meters. These sensors are compatible with Coherent LabMax-Pro SSIM, LabMax-TOP, FieldMaxII-TOP and FieldMaxII-P meters. USB and RS232 enabled models are also available. All Excimer…

Book.book

Book.book

…3.5%.) Repetition Rate Linearity Repetition rate linearity is +/- 1% when using EnergyMax sensors with 3sigma, FieldMaxII-TOP and FieldMaxII-P within the repetition rate specification of the meter. In practice, the actual error is often much less than 1%. Repetition rate linearity is +/- 1% up to…

Book.book

Book.book

Manual 12 Use of EnergyMax sensors at average power levels beyond the base model average power specification--without the optional heat sink--may cause permanent damage to the sensor. Diffuse Metallic EnergyMax sensors are compatible with Coherent LabMax-TOP, 3sigma, EPM1000, and EPM2000 meters.

Book.book

Book.book

…3.5%.) Repetition Rate Linearity Repetition rate linearity is +/- 1% when using EnergyMax sensors with 3sigma, FieldMaxII-TOP and FieldMaxII-P within the repetition rate specification of the meter. In practice, the actual error is often much less than 1%. Repetition rate linearity is +/- 1% up to…

Book.book

Book.book

Manual 12 Use of EnergyMax sensors at average power levels beyond the base model average power specification--without the optional heat sink--may cause permanent damage to the sensor. Diffuse Metallic EnergyMax sensors are compatible with Coherent LabMax-TOP, 3sigma, EPM1000, and EPM2000 meters.

Book.book

Book.book

…3.5%.) Repetition Rate Linearity Repetition rate linearity is +/- 1% when using EnergyMax sensors with 3sigma, FieldMaxII-TOP and FieldMaxII-P within the repetition rate specification of the meter. In practice, the actual error is often much less than 1%. Repetition rate linearity is +/- 1% up to…

Book.book

Book.book

Manual 12 Use of EnergyMax sensors at average power levels beyond the base model average power specification--without the optional heat sink--may cause permanent damage to the sensor. Diffuse Metallic EnergyMax sensors are compatible with Coherent LabMax-TOP, 3sigma, EPM1000, and EPM2000 meters.

Book.book

Book.book

…3.5%.) Repetition Rate Linearity Repetition rate linearity is +/- 1% when using EnergyMax sensors with 3sigma, FieldMaxII-TOP and FieldMaxII-P within the repetition rate specification of the meter. In practice, the actual error is often much less than 1%. Repetition rate linearity is +/- 1% up to…

Book.book

Book.book

…User Manual 14 Use of EnergyMax sensors at average power levels beyond the base model average power specification--without the optional heat sink--may cause permanent damage to the sensor. MaxBlack EnergyMax sensors with diffusers are compatible with Coherent LabMax-TOP, 3sigma, FieldMaxII-TOP,…

Book.book

Book.book

…User Manual 14 Use of EnergyMax sensors at average power levels beyond the base model average power specification--without the optional heat sink--may cause permanent damage to the sensor. MaxBlack EnergyMax sensors with diffusers are compatible with Coherent LabMax-TOP, 3sigma, FieldMaxII-TOP,…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions