Ask a Question
Coherent

Search Results

Refine

Result Type

1 - 12 of 306 Products for 'Manual J-3' Page 1 of 26 |
Related Categories: Rf Amplifier | J3 Series

Manual J-3

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual 4 - 20 Extended Interface Pin Descriptions Table 4-8. Extended Interface Pin Descriptions PINS FUNCTION DESCRIPTION 1, 2, 11, 14, 21 - Not currently used on this product. 9 (+) and 22 (-) Shutter Closed Status Active high, differential, digital,…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual 4 - 16 Figure 4-10. RF Amplifier Output Signals - VSWR Fault Modulation (pin 7 referenced to pin 14) 1. If VSWR fault is detected on the first pulse, Analog Forward (pin 1 referenced to pin 14) RF is applied to the laser during a HI condition. 2.…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

Control Interfaces 4 - 15 Output Signal Waveforms Figure 4-9, Figure 4-10 and Figure 4-11 provide representative input and resulting output signals under normal operation, a VSWR fault condition and a duty cycle fault condition respectively. Each figure provides a detailed description of the input…

Diamond J-3-5 COlaser DS 0716revA 1.pdf

Diamond J-3-5 COlaser DS 0716revA 1.pdf

…(%) ±3 Mode Quality (M2) 2 1 All specifications apply when the product is operated in accordance with the guidelines defined in the operators manual. 2 Measured at 1 kHz PRF, 60% duty cycle. 3 Output stability specification may not be met at lowest power or at acoustic resonances. 4 Measured…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Operator's Manual 3 - 24 4. Insert fork-type lifting device between the laser and the box, then lift the laser out of the box (Figure 3-9). Figure 3-9. Lifting the Laser

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

Preinstallation Manual DIAMONDTM J-3 Series OEM Lasers 1280 Blue Hills Avenue Bloomfield, CT 06002

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

Preinstallation Manual DIAMONDTM J-3 Series OEM Lasers 1280 Blue Hills Avenue Bloomfield, CT 06002

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions