Search Results

1 - 12 of 100 Products for 'Measuring Laser Power And Energy Output' Page 1 of 9 |

Measuring Laser Power And Energy Output

Large Area High Power Water-Cooled Thermopile Sensors 5kW

Large Area High Power Water-Cooled Thermopile Sensors 5kW

…PM5K-100 provide a range of power capabilities in a 100 mm diameter size, and are also useful for diode bars and large cross-section laser beams. The PM5K-200 features a 200 mm diameter detector, and is specifically intended to measure the power output of large laser diode bar arrays. Drawing…

Understanding ISO 17025 for Laser Power and Energy Measurement Whitepaper FINAL 04-27-12 .pdf

Understanding ISO 17025 for Laser Power and Energy Measurement Whitepaper FINAL 04-27-12 .pdf

…optical laser power and energy measurements, the calibration process starts when an instrument builder sends a dedicated "golden" sensor to a standards organization, which then exposes the sensor to a series of known power and/or energy inputs (depending upon the sensor type), recording the output

Laser Power Sensors

Laser Power Sensors

…- Laser Power A diverse portfolio of nearly 100 different standard laser power sensors over a broad range of laser output characteristics allowing you to select a system to best meet your particular needs. This diversity enables laser power measurement over an extremely broad range of laser output

Laser Power Meters and Energy Meters

Laser Power Meters and Energy Meters

…optical sensors for laser power measurement. FieldMaxII-TOP FieldMaxII-TOP Laser Power & Energy Meter compatible with thermopile, pyroelectric, and optical sensors. Measures pulse energy up to 300 pps. Live measurements and statistics. Includes USB interface, analog output and rechargeable battery.…

LabMax-TO

LabMax-TO

--> LabMax-TO Laser Power Meter (RoHS)
* Measures Laser Power
* Ergonomic design enhances user experience
* Compatible with LM- and PM-model thermopile and optical sensors with beam position display
* Data logging to onboard memory and to USB flash drive
* USB and RS-232 PC interfaces
* RoHS…

J-Power Pro Energy Sensor DB-25-to-BNC Adapter

J-Power Pro Energy Sensor DB-25-to-BNC Adapter

…raw output voltage of the sensor directly to the BNC connector. The peak voltage of the output (as referenced from baseline voltage) can then be measured using an oscilloscope or another analog-to-digital input device. The calibrated peak voltage represents the integrated energy of the laser pulse.…

RAPID NX Laser

RAPID NX Laser

…as the energy ratio of the main pulse and first post pulse Pulse stability (RMS) < 1% at 1 MHz Measured over 1000 pulses - 1 sigma Pulse stability (pk-pk) < 5% For 1000 consecutive pulses Power stability < 1% over 8 hours Pk to Pk variation of the rolling average power (average power measured every…

AVIA NX nanosecond laser

AVIA NX nanosecond laser

…ultimately determined by laser power. AVIA NX delivers the industry’s highest UV power – up to 40 watts – and the highest green power – up to 65 watts. And with the green AVIA NX, you even have the choice of high pulse energy or high repetition rate to perfectly match the power characteristics to…

EnergyMax-RS Sensors

EnergyMax-RS Sensors

…sensors enable the measurement of the energy per pulse or average power of pulsed lasers from the nanojoule to the multi-joule level, over wavelengths from the deep ultraviolet through the far infared, and form single pulses to repetition rates of 1 kHz (with measurements of every pulse).…

FieldMate

FieldMate

laser power measurements and laser tuning. Specifications Max. Measurable Power (with thermopile sensor) 29.9 kW Max. Measurable Power (with optical sensor) 99.9 mW Min. Measureable Power (with thermopile sensor) 100 µW Min. Measurable Power (with optical sensor) 10 nW Displayable Full-Scale Power

FieldMaxII-TOP

FieldMaxII-TOP

…FieldMaxII-TOP Laser power and energy meter (RoHS compliant) The FieldMaxII-TOP laser power and energy meter functions with a broad range of thermopile, optical and pyroelectric sensors. Together, these sensors enable FieldMaxII-TOP to measure UV, visible, and IR laser output from the nanowatt…

LaserCam-HR II

LaserCam-HR II

…High-speed image capture rates (up to 15 frames per second)
* Pass/Fail TTL level output
* RS-232 and TCP/IP communication protocols
* RoHS compliant BeamView Software BeamView-USB is recognized as the leading laser beam profiling software. It has been designed to provide flexibility, speed, and…