Search Results

37 - 48 of 107 Products for 'Measuring Laser Power And Energy Output' Page 4 of 9 |

Measuring Laser Power And Energy Output

DIAMOND C-20 and C-30 Liquid-Cooled OEM Lasers Preinstallation Manual, Rev. AF

DIAMOND C-20 and C-30 Liquid-Cooled OEM Lasers Preinstallation Manual, Rev. AF

…"Safety of Laser Products". Compliance of this laser with the European
requirements is certified by the CE mark.
2.2.1 Laser Classification
Governmental standards and requirements specify that the laser must be
classified according to the output power or energy and the laser

2016-Ultrafast-Laser-Systems-Catalog.pdf

2016-Ultrafast-Laser-Systems-Catalog.pdf

…diagnostics via Ethernet interface
Monaco 1035-40-1 Monaco 1035-10-4
Fundamental Center Wavelength (nm) 1035 ±5 1035 ±5
Output Power and Energy 40W, 40 J at 1 MHz 40W, 10 J at 4 MHz
Repetition Rate Single-shot to 1 MHz Single-shot to 4 MHz
Pulsewidth (fs) <400 <400…

Layout 1

Layout 1

TECHNOLOGY LEADERS Laser Components & Systems Photonics & Imaging Technology, May 2018 11 Novel Laser Power Sensor Technology for Process Control The need to measure laser output characteristics, including average power, pulse energy, and pulse shape, is a common requirement across many…

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…analog measurement of
EnergyMax and PowerMax-Pro sensors,
use J-Power Pro with a scope
Test Slides
POWER
& ENERGY
Custom
& OEM
BEAM
DIAGNOSTICS
CALIBRATION
& SERVICE
Power
& Energy
Meters
Laser

book.book

book.book

…specify that the laser must be classified
according to the output power or energy and the laser wavelength.
Based on those factors, the classification varies for different StingRay and BioRay
lasers. StingRay and BioRay lasers typically have an output power between 20 mW

COHR MonacoSmartCleave DS 0318 4.pdf

COHR MonacoSmartCleave DS 0318 4.pdf

…non-condensing
SHIPPING SPECIFICATIONS
Temperature -20 to +60°C (-4 to 140°F)
1 All specifications at maximum energy.
2 Measured at 1m from laser output window.
3 External isolation required depending on application.
4 Optional 110 to 240VAC power supply available.

COHR RLScatalog 2017revA web.pdf

COHR RLScatalog 2017revA web.pdf

…>1,000,000:1 pre with <15% energy loss with optional pulse slice.
5 Under stable environmental conditions.
6 Model and number of pump lasers used dependent on Cryo PA output energy (contact factory for details).
Specifications
Laser
Measurement
and Control

COHR Monaco517 DS 0318 4.pdf

COHR Monaco517 DS 0318 4.pdf

…non-condensing
SHIPPING SPECIFICATIONS
Temperature -20 to +60°C (-4 to 140°F)
1 All specifications at maximum energy.
2 Measured at 1m from laser output window.
3 External isolation required depending on application.
4 Optional 110 to 240VAC power supply available.

COHR Monaco517 DS 0120 1.pdf

COHR Monaco517 DS 0120 1.pdf

…non-condensing
SHIPPING SPECIFICATIONS
Temperature -20 to +60°C (-4 to 140°F)
1 All specifications at maximum energy.
2 Measured at 1m from laser output window.
3 External isolation required depending on application.
4 Optional 110 to 240VAC power supply available.

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

power is on, the Analog Out SMB connector outputs a voltage
in proportion to the current laser measurement. The output voltage
is zero (0) volts when the measured energy or power is zero (0) or
less. The output voltage is the full-scale output voltage when the
measured energy or…

COHR Monaco UV DS 0619 3.pdf

COHR Monaco UV DS 0619 3.pdf

…maximum pulse energy.
2 Measured 1 m ahead of laser front.
3 External isolation required depending on application.
4 External temp held to ±1°C.
5 Optional 110 to 240 VAC power supply availible.
Monaco 345-20-25: Power and Pulse Energy
(single pulse, max power at 1.25…

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual

power is on, the Analog Out connector outputs a voltage
proportional to the current laser measurement. The output voltage is
zero (0) volts when the measured energy or power is zero (0) or less.
The output voltage is the full-scale output voltage when the
measured energy or power