Search Results

Refine

Result Type

1 - 12 of 25 Products for 'Mechanical Shock' Page 1 of 3 |

Mechanical Shock

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…affordable, compact
lasers. Using AlignLock technology, all modules are
optimized for thermal conductivity, protected from
mechanical shock and deliver superior pointing
accuracy and stability.These compact, rugged and
reliable diode laser sources also have a sophisticated…

Revolution High-Power Q-Switched Laser System Preinstallation Manual

Revolution High-Power Q-Switched Laser System Preinstallation Manual

…listed below, either annually or whenever the product
has been subjected to adverse environmental conditions (e.g., fire,
flood, mechanical shock, spilled solvents). This maintenance is to be
performed by the user, as outlined below.
· Verify that all the warning labels listed…

Chameleon Reliability Antarctia Final WP.pdf

Chameleon Reliability Antarctia Final WP.pdf

…range.
Vibration/Mechanical Shock Testing
Individual components of Chameleon, and then the
entire laser assembly, are subjected to shock, impact
and vibration testing. If any components are
redesigned in any way, this series of mechanical tests
is repeated. Vibration…

CO Lasers from Lab to Fab

CO Lasers from Lab to Fab


(bendability) and resistance to mechanical shock of thin glass is a function of
edge quality, the ability to cut with low
defects is critical for this application.
Glass of this thickness is nearly impossible to cut mechanically, and even
challenging to process using…

Microsoft Word - HECLs demonstrate high power and narrow spectral linewidth.doc

Microsoft Word - HECLs demonstrate high power and narrow spectral linewidth.doc

…Coolers (TECs) to accurately maintain "lock" on the desired operational wavelength. Furthermore, these systems are often sensitive to mechanical vibration and shock and therefore are not suitable for harsh operational environments. To address these limitations, a methodology to leverage the benefits…

Microsoft Word - 2018 11 Whitepaper CleanWeld E

Microsoft Word - 2018 11 Whitepaper CleanWeld E

…can create internal leakage currents which would short-circuit the battery. Finally,
the weld must be mechanically strong enough to withstand rough treatment, or even the shock
of a collision.
Sealing the aluminum battery case has traditionally been performed using laser conduction…

COHR OBIS CellX DS 0117 3.pdf

COHR OBIS CellX DS 0117 3.pdf

…in.)
4X Ø 4.8 mm (0.19 in.) Thru All
Mounting Holes for M4 or #8
Socket Head Cap Screws
MECHANICAL SPECIFICATIONS
OBIS CellX
OBIS CellX Datasheet
MECHANICAL AND ENVIRONMENTAL
SPECIFICATIONS OBIS CellX
Dimensions1 (mm) (L x D x H) 155 x 180 x 52.2

COHR OBIS CellX DS 0719 4.pdf

COHR OBIS CellX DS 0719 4.pdf

…Supply Voltage (V DC) 12 ± 2 (100 Watt minimum)
Power Consumption (W) Typical 20, Maximum 60
MECHANICAL SPECIFICATIONS
OBIS CellX Datasheet
OBIS CellX
1 See mechanical drawing.
2 OEM Product - does not comply with CDRH 21CFR 1040.10 and 1040.11 without appropriate…

Industrial Laser Solutions - March/April 2018

Industrial Laser Solutions - March/April 2018

…moisture) can create internal leakage currents that would short-circuit the battery. Finally, the weld must be mechanically strong enough to withstand rough treatment, or even the shock of a collision. Sealing the aluminum battery case has traditionally been performed using laser conduction welding…

Laser Focus World - June 2015

Laser Focus World - June 2015


bulk material; subsequent water-jet cooling
is then used to produce a thermal shock
which creates a scribe line in the glass. For
thicker glass substrates, this is followed by
mechanical breaking. The overall process
is the same with the CO laser; however,
the…

Information Display Magazine September/October 2017, Vol. 33, No. 5 issue

Information Display Magazine September/October 2017, Vol. 33, No. 5 issue

…as much force as mechanically cut glass.1
Laser cutting can also reduce the number of
process steps, since it requires few, if any,
subsequent cleaning or grinding stages. So
while the capital cost for a laser cutting station
is higher than for a mechanical system, the

Industrial Laser Solutions - September/October 2015

Industrial Laser Solutions - September/October 2015


Seed metal
layer
Polymer substrate
a) b)
c) d) Conductive feature
unaltered
Seed metal
layer removed
Shock wave
www.industrial-lasers.com SEPTEMBER/OCTOBER 2015 Industrial Laser Solutions 31
a p p l i c a t i o n r e p o r t
finally, the…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions