Search Results

1 - 12 of 30 Products for 'Mechanical Shutter' Page 1 of 3 |

Mechanical Shutter

AVIA NX nanosecond laser | Coherent

AVIA NX nanosecond laser | Coherent

…which is why all of these tests are performed at Coherent’s own on-site HALT/HASS facility. For example, HALT testing on the shutter assembly alone meant the AVIA NX mechanism was tested to 10 million cycles, and the water manifold in the laser was tested to three times the operational pressure the…

HyperRapid NX - Industrial Picosecond Laser

HyperRapid NX - Industrial Picosecond Laser

…pulse control and synchronization features. Pulses can be triggered on-demand with low jitter (<25 ns) and trigger-to-pulse delay. The fast process shutter allows both on/off control and energy attenuation for each individual pulse. Burst mode can be selected to determine how many 10 ps-pulses with…

Coherent Magnum II Laser Operator's Manual

Coherent Magnum II Laser Operator's Manual


vii
Preface This manual contains user information for the Coherent Magnum II
laser. From the "eye safe" design of our built-in mechanical shutter
and integrated focus adjustment, to the uniform line intensity distribution, your Coherent structured laser light generator has been…

Book.book

Book.book


extend the stability of the beam over time and temperature. The heat
sink provides proper thermal dissipation and mechanical
positioning. The safety shutter is easily accessible, and the rear panel
is unobstructed for access and connections.
Features · 6.35 cm (2.5 in.) beam…

OBIS LaserSafety Installation QSG 11-85-44 9 RevAF COVERS.fm

OBIS LaserSafety Installation QSG 11-85-44 9 RevAF COVERS.fm

…is negative.
3
OBIS FP:
Remove the fiber shutter cap.
Shutter Cord
Shutter Cap Shutter Cap removed
OBIS:
Slide the lever right (to the
"OPEN"position) to open
the mechanical front
shutter to allow light
emission.
4 5
Apply 12V power…

Bio Photonics - September 2015

Bio Photonics - September 2015


This switching must be performed with
no undesirable dead time (i.e., shifts
in the beam path) and without using
mechanical shutters or a complex and
costly approach, such as an acoustooptic tunable filter.
Lord notes, "As recently as five years
ago, we…

CaseStudy TIRF MullinsLab UCSF.pdf

CaseStudy TIRF MullinsLab UCSF.pdf

…wavelengths. And we
need to do this switching with no undesirable dead time
or shifts in the beam path, i.e., without using
mechanical shutters or a complex and costly approach
such as an AOTF. As recently as five years ago, we
simply didn't have low-cost options to conduct…

LIT BioPhotonics OBIS-GALAXY TIRF-Microscopy 0915.pdf

LIT BioPhotonics OBIS-GALAXY TIRF-Microscopy 0915.pdf


This switching must be performed with
no undesirable dead time (i.e., shifts
in the beam path) and without using
mechanical shutters or a complex and
costly approach, such as an acoustooptic tunable filter.
Lord notes, "As recently as five years
ago, we…

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

…when the top cover(s) of the laser head is removed. An interlock
fault initiation will terminate the pump laser by activating a shutter
mechanism as well as removing power from the infrared diodes in
the pump laser power supply. While active, the interlock defeats are
directly…

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

…controls
· Superior reliability
· Compatible with MetaMorph and Manager Software
Mechanical Specifications
38 mm
(1.5 in.)
Status
Indicator
Safety
Shutter
Laser Exit Aperture
M6 X 0.75 Thread
2.54 mm Deep
OEM Label
Fan
USB…

00 Legend Elite Preinstallation.book

00 Legend Elite Preinstallation.book

…when the top cover(s) of the laser head is removed. An interlock
fault initiation will terminate the pump laser by activating a shutter
mechanism as well as removing power from the infrared diodes in
the pump laser power supply. While active, the interlock defeats are
directly…

Libra PreInstallation.book

Libra PreInstallation.book

…or any one of the three
top covers of the Libra is removed. An interlock fault initiation will
terminate all lasing by activating a shutter mechanism as well as
removing power from the infrared diode lasers in each power supply.
While installed, the interlock defeats are directly…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions