Search Results

1 - 12 of 19 Products for 'Mid ir 2' Page 1 of 2 |

Mid ir 2

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

2 532 nm 2.8 J/cm 2 1064 nm 14 J/cm 2 The J-50MB-IR is specifically designed for high damage threshold when used with pulsed lasers used in medical procedures such as Erbium and Holmium lasers. It has a damage threshold in excess of 100 J/cm at 2940 nm with a 100 µs pulse width. YAG/Harmonics and IR

Chameleon Discovery NX w/ Total Power Control

Chameleon Discovery NX w/ Total Power Control

…Discovery VUE second harmonic generation, giving gap-free tuning from 330 nm to 1320 nm. Tuning to the Mid-IR range is also possible using the Levante IR femtosecond OPO, which is pumped by the 1040 nm output from the Discovery. This gives tuning out to 5 µm, and even up to 15 µm with difference…

Ultrafast Amplifiers

Ultrafast Amplifiers

…email: sales.china@coherent.com Room 1006 – 1009, Raycom Info Park Tower B, No. 2, Kexueyuan South Road, Haidian District Beijing 100190, China Call +82 02 460 7900 영업팀 직통 전화번호 : +82 02 3419 8039 서비스팀 직통 전화번호 : +82 02 460 7999 코히런트는 전 세계에서 모든 제품, 서비스 또는 문의에 대한 지원을 제공할 수 있는 사무소를 운영하고 있습니다. 글로벌 사이트에…

compatibility matrix 02

compatibility matrix 02

Laser Wavelength Power Meter Power Sensor Energy Meter Energy Sensor Laser Measurement & Control Product Compatibility Matrix Part number legend available on last page. | p.1 CO2 (Diamond) C-20, C-30 10.6 um FieldMaxII-TO PM30 C-40, C-55 C-70, J-2 10.6, 9.4 um FieldMaxII-TO PM150 J-3-5 CO Laser…

2009 LMCCatalog86.pdf

2009 LMCCatalog86.pdf

…PM10 or PS101 Sapphire 561 561 FieldMaxII-TO PS10 Verdi V2,V5,V6,V8 532 FieldMaxII-TO PM10 Verdi V10,V12,V18 532 FieldMaxII-TO PM30 Verdi IR 1064 FieldMaxII-TO PM30 Laser Wavelength (nm) Power Meter Power Sensor Energy Meter Energy Sensor AVIA (30W) 532 FieldMaxII-TO PM150 - - Indigo-DUV…

COHR RLScatalog 2017revA web.pdf

COHR RLScatalog 2017revA web.pdf

…OPA, 10W Verdi pumping a RegA 9000/9050, and Mira/Verdi seeding.
Same specifications apply for two simultaneously pumped OPAs at 100 kHz.
2 Peak-to-peak noise measured in one hour at 10 Hz to 100 Hz.
3 Power drift over one hour (after 15-minute warm-up); crystal temperature controlled…

COHR DIAMOND J-3-5 COlaser DS 0617 2.pdf

COHR DIAMOND J-3-5 COlaser DS 0617 2.pdf

Fully Sealed Carbon Monoxide Laser A new generation of carbon monoxide (CO) lasers from Coherent, promise enhanced processing characteristics in applications ranging from glass, ceramic and film cutting and drilling, through medical and aesthetics fractional skin resurfacing. While CO lasers were…

2016-Ultrafast-Laser-Systems-Catalog.pdf

2016-Ultrafast-Laser-Systems-Catalog.pdf

…a RegA 9000/9050, and either Mira/Verdi or Vitesse seeding.
Same specifications apply for two simultaneously pumped OPAs at 100 kHz.
2 Peak-to-peak noise measured in one hour at 10 Hz to 100 Hz.
3 Power drift over one hour (after 15-minute warm-up); crystal temperature controlled…

DFG9800 DSrevA 3.qxd

DFG9800 DSrevA 3.qxd

…nm
System Specifications DFG 9800 DFG 9850
Pump Power 12W Verdi (split off from V-18) 10W Verdi
DFG Conversion Efficiency at 4 m1 >2%, 250 kHz >1.5%, 100 kHz
DFG Unit (L x W x H) 58.4 x 35.6 x 18.4 cm (23 x 14 x 7.25 in.)
Input Beam Height 12 cm (4.75 in.) above table…

Lasers | Photonics Handbook®

Lasers | Photonics Handbook®

…watts, primarily in marking and engraving
applications.
Sealed CO2
lasers and fiber lasers have come to dominate metal cutting in the 2- to 4-mm thickness range. Sealed CO2
is usually the first choice when both
metals and nonmetals must be processed, while fiber lasers have…

Photonics Spectra - September 2015

Photonics Spectra - September 2015

…its midwavelength-IR output offers two important
advantages, in terms of applications, as
compared to the long-wavelength IR output of the CO
2
laser. The first of these is
the fact that many materials exhibit significantly different absorption at the shorter

SurfaceCatalystStructure AstrellaProfXiong2D Case Study FINAL.pdf

SurfaceCatalystStructure AstrellaProfXiong2D Case Study FINAL.pdf

…others showed that SFG could be combined into a 2D spectroscopy setup,
publishing their first data in 20117. Moreover, they showed that this set-up delivered all the
subtleties and multi-leveled information for surface samples that 2D IR had already
demonstrated for bulk samples.…