Search Results

Refine
1 - 9 of 9 Products for 'Modemaster Manual' Page 1 of 1 |
  • 1

Modemaster Manual

Laser Beam Diagnostics

Laser Beam Diagnostics

…profiling system for applications in the 900 nm to 1700 nm wavelength range. ModeMaster PC M-Squared (M2) Beam Propagation Analyzer ModeMaster PC M-Squared (M2) Beam Propagation Analyzer Newest version of the ModeMaster line of M2 Laser Beam Propagation Analyzers. WaveMaster Wavelength Meter…

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

…Electro-Static Discharge Standard IEC 1000-4-2, 1995.
7 Typically 85% of heat load through the base plate. See Users Manual for more detail.
8 Non-Condensing. See User Manual for more detail.
9 For LS versions laser head baseplate temperature needs to be maintained at <
_40°C.…

ModeMaster PC M-Squared

ModeMaster PC M-Squared

…Materials Drawings ModeMaster PC M-Squared (M2) Beam Propagation Analyzer ModeMaster PC M-Squared (M2) Beam Propagation Analyzer ModeMaster PC M-Squared (M2) Beam Propagation Analyzer White Papers Mode Master Whitepaper ModeMaster PC Software Installation Guide ModeMaster PC User Manual Call +1 800…

ModeMaster PC Software Installation Guide

ModeMaster PC Software Installation Guide

ModeMaster PC Software Installation Guide
v
Preface
This guide includes instructions for installing the ModeMaster PC
software and USB driver.
For detailed information on ModeMaster PC, refer to the ModeMaster PC User Manual (part number 0217-802-00), available in

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…configuration.
4. Use the table below to determine the part number of
the ModeMaster PC configuration selected, and to verify
all other beam specifications.
5. If more than one ModeMaster PC configuration
appears to be needed in order to cover all required
beam…

COHR OBISfamily DS 0818 8.pdf

COHR OBISfamily DS 0818 8.pdf

…for 100% power.
3 M2 measured with ModeMaster with 90/10 clip levels.
4 Typical power-on delay 0.1 minutes.
5 Typically 85% of heat load through the base plate. See Users Manual for more detail.
6 Non-Condensing. See User Manual for more detail.
7 Fiber FC/APC connector…

COHR OBISfamily DS 0719 2.pdf

COHR OBISfamily DS 0719 2.pdf

…for 100% power.
3 M2 measured with ModeMaster with 90/10 clip levels.
4 Typical power-on delay 0.1 minutes.
5 Typically 85% of heat load through the base plate. See Users Manual for more detail.
6 Non-Condensing. See User Manual for more detail.
7 Fiber FC/APC connector…

COHR OBISfamily DS 0119 3.pdf

COHR OBISfamily DS 0119 3.pdf

…for 100% power.
3 M2 measured with ModeMaster with 90/10 clip levels.
4 Typical power-on delay 0.1 minutes.
5 Typically 85% of heat load through the base plate. See Users Manual for more detail.
6 Non-Condensing. See User Manual for more detail.
7 Fiber FC/APC connector…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions